Description
EVO have extensively examined the Maverick X3 and have determined through many hours on the dyno that the stock air filter canister outlet is too small when trying to make big horsepower. Any restriction before the turbocharger directly effects power output. Also, the factory accordion style intake boot creates turbulence as air enters the mouth of the turbocharger which also negatively effects turbocharger efficiency. EVO V-FLOW intake vastly enlarges the factory filter canister outlet by replacing the pressed in end cap with their anodized, billet aluminum replacement. The OEM filtration system remains unchanged in terms of how it filters dirty air. The only difference is it is much more efficient with their larger outlet and smooth silicone rubber transition hose.
Features
- NEW - entire body including frame mount is machined from a solid block of 6160-T6 aluminum with no welding to crack or break.
- Simple, easy installation
- Shipped ready for mounting on the X3 frame, however, the billet cap can be rotated in 45 degree increments to allow virtually any other mounting location
- Internally baffled with Stainless Steel screening to promote the proper separation of the air/oil vapor
- Anodized black with stainless hardware
- Designed for the Can Am X3
- Reuses OEM crankcase vent hose - no additional fittings to mess with
- Prevents oil and moisture from contaminating the turbo compressor, charge tubes and intercooler
- Prevents oil from lowering the effective octane of the incoming air/fuel mixture
- Cleanable filter element and prefilter included
- Thumbscrew drain for easy periodic draining
- PROUDLY made in the USA by US craftsman
Included parts
- (1) EVP Billet Intake
- (1) EVP Silicone Connector Hose
- (1) 1/16” NPT Hose Barb
- (1) 50-70mm Pinch Clamp
- 10.5mm Pinch Clamp
- (1) 3/4"-3/4” Nylon Hose Adaptor
- (1) Foam Gasket
Disclaimer
This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code§§ 27156 and 38391]. This product is sold only for use in connection with EPA -certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA -certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law.
View AllClose
Warranty
WARRANTY
Any Evolution Powersports Products Used in Sanctioned or Unsanctioned Racing Voids Warranty.
TERM LIMITS
Exhaust: 1 year
Big Turbo Kits: 30 days
Electrical Parts: 14 days
All Other EVO Parts (excluding Big Turbo Kits & Electrical): 1 year
Non-EVO 3rd Party Parts: Not Warrantied by Evolution Powersports - Contact Manufacturer
Evolution Powersports' Warranty only applies to original product purchaser.
All warranty claims must be accompanied by images of the entire vehicle from:
All 4 sides
The part(s) installed on the vehicle
The issue with the part(s)
Warranty claims without images will not be acceptedTo issue a Warranty Claim, email service@evopowersports.com the above photographs with Customer and Order details.
If the part(s) are damaged and meet the warranty criteria, an RMA number will be issued.
After RMA is issued, Dealer must ship the product to the address provided with the RMA.
Product must be shipped to EVO at Customer's expense.
If parts are damaged in shipping back to EVO, it is up to the customer to contact their shipping company for damage reimbursement.
Once parts are received EVO, at its sole discretion, will determine whether a warranty applies and remedy accordingly.
All warranty periods are determined from the date the product was delivered according to the carrier tracking number. Evolution Powersports bears no responsibility for damage caused to your vehicle by the installation of EVO products. Although we have been careful to supply you with the highest quality parts possible, we assume no liability for damage to vehicle or personal injury from installing or using any of our products.
View AllClose