null

How COVID-19 Has Affected the UTV Industry (click here)

FOX Shocks

FOX Racing 16-19 Yamaha Wolverine Performance Series 2.0 Coil-Over QS3 Shocks (Kit of 4)

In stock
See Rick's Thoughts
Rick DeWeeze
Model #:
885-06-104

FOX Racing 16-19 Yamaha Wolverine Performance Series 2.0 Coil-Over QS3 Shocks (Kit of 4)

$1,995.00
Sizing Links & Information

The FOX Performance Series 2.0 Podium QS3 complete coli-over shock kit is a direct bolt-on four corner replacement for your stock Yamaha Wolverine shocks and springs. Take your Wolverine from a capable utility vehicle to a full-on sport vehicle to tackle the kind of off-road terrain that will leave you grinning ear to ear.

The Podium 2.0 QS3 shocks replace your stock emulsion shocks with an internal floating piston (IFP) system housed in the piggyback reservoirs to keep the gas charge from mixing with the shock oil. This keeps the oil from effectively thinning out and losing damping control as the shocks get worked over washboards, rocks, and big dips.

The springs on the Wolverine’s stock shocks are fairly soft to give you a comfortable ride. We wanted to retain that level of comfort but also keep you from bottoming out at speed over the rough stuff. Using a combination of single-rate front springs and progressive-rate rear springs, we were able to ride trails we normally test sport UTVs without bottoming but still enjoy a ride as smooth as stock.

The Quick Switch 3-position compression damping adjustment allows you to quickly set your shocks to adapt to your riding conditions. Set the QS3 to setting 1 for the softest ride on smoother trails or rock crawling. Setting 2 firms things up a bit if you’re carrying extra passengers or gear. Setting 3 gives you bottom-out protection when you put your foot down and catch some air off a dune or sprint off into the desert.

Beyond the extra capability you gain after bolting on a set of FOX Podium 2.0 QS3 shocks, you’ll have peace of mind knowing that they’re ruggedly built with hard-anodized aluminum bodies and reservoirs that resist corrosion, 5/8-inch hard chromed shafts for smooth operation and longer seal life, and are fully rebuildable if you ever damage a part or want to get them custom-valved for a specific riding application.

885-06-108.png

Features:

  • High-flow velocity-sensitive damping
  • Fully re-buildable and re-valvable
  • Ultra-durable bottom-out bumper
  • 2.0” Type III hard-anodized aluminum body and reservoir
  • 5/8” hard-chromed shaft
  • Progressive single coil (choice of standard or heavy weight)

Specifications:

  • Adjustments:
    • Spring Preload
    • Quick Switch 3-position compression (QS3)
  • Compressed Length:
    • Front: 12.30"
    • Rear: 14.80"
  • Extended Length:
    • Front: 17.82"
    • Rear: 21.82"
  • Shock Travel:
    • Front: 5.52"
    • Rear: 7.02"
  • Top Mount Style:
    • Eyelet
  • Bottom Mount Style:
    • Eyelet
  • Reservoir Type:
    • Piggyback

Documents & Links:

icon-pdf.png Installation Guide »

Fitment:

MAKEMODELYEAR(S)
Yamaha YXF85 Wolverine X4 2018-2019
Yamaha YXF85 Wolverine X4 SE 2018-2019
Yamaha YXE70 Wolverine 2016-2018
Yamaha YXE70 Wolverine EPS 2017
Yamaha YXE70 Wolverine R-Spec 2016-2018
Yamaha YXE70 Wolverine R-Spec EPS 2016-2018
Yamaha YXE70 Wolverine R-Spec EPS SE 2016-2017
FOX Factory Inc. products are covered by a 1-Year Limited Warranty against defects in materials and/or workmanship. Any modifications to the product will void the warranty. This Warranty will be extended to the original retail consumer of an OEM Customer's FOX Factory Inc. equipped vehicle and is valid for one year from the original date of purchase from an OEM Customer's authorized dealer. Warranty is limited to the repair or replacement of the FOX Factory Inc. product. FOX Factory Inc. reserves the right to make the final decision with regards to all warranty related issues.