High Lifter 2014-17 Polaris RZR 1000 XP Upper Radius Bar Kit (Spherical Bearing) (10mm Bolt) (Lime)

Description

Stock radius bars don't cut it! A bent radius bar will quickly lead to breakage or worse, being stranded. The High Lifter 2014-17 Polaris RZR 1000 XP Upper Radius Bar Kit (Spherical Bearing) (10mm Bolt) (Lime) (PSRA-RZR1-1-SB10-L) is 50% larger than stock and maximize ground clearance with extreme arches to give you the most clearance possible while still protecting your axle.

Features

• 50% larger than average stock bars - Crafted from 1 ¼” x .188” DOM steel tubing
• Simple bolt-on kit
• 5/8” heim joint
• Spherical bearings
• Most stock powder coat colors available in stock
• Step by step instructions complete with multi-images for a quick install
• Limited Lifetime Warranty

Fitment

• 2016 Polaris RZR 1000 XP EPS
• 2016 Polaris RZR 1000 XP High Lifter Edition
• 2016 Polaris RZR TURBO XP EPS
• 2016 Polaris RZR 1000 XP 4 EPS
• 2016 Polaris RZR TURBO 4 XP EPS
• 2016 Polaris RZR 1000 XP 4 High Lifter Edition
• 2014 Polaris RZR 1000 XP
• 2014 Polaris RZR 1000 XP 4
• 2015 Polaris RZR 1000 XP EPS
• 2015 Polaris RZR 1000 XP High Lifter Edition
• 2015 Polaris RZR 1000 XP 4 EPS
• 2017 Polaris RZR 1000 XP 4 EPS
• 2017 Polaris RZR 1000 XP EPS
• 2017 Polaris RZR 1000 XP SE EPS

Notes

• 2017 Polaris RZR XP 1000 models have two different types of hardware connecting the rear factory radius bars: 10mm or 12mm bolts. Before purchasing radius bars for your 2017 Polaris RZR XP, you need to determine if you have 10mm or 12mm hardware. To determine this will be as simple as finding which socket is used to remove the center bolt holding the radius to the frame. For 10mm hardware you will use a 15mm socket. For 12mm hardware you will use an 18mm socket.
• This kit does not fit units that have 12mm factory bolts!