High Performance Side By Side LED Lighting | Designed With Purpose For Durability
Heretic Studio's only option for the Yamaha YXZ should be your only option. They give your rig more than an upgraded look, it's an upgrade in lighting performance. Our lights are nearly double the output of the stock LED headlights and just as reliable. Each set features custom colored (blue, red, white, green etc.) LED halo running lights, low and high beams. Adding premium performing lighting has never been easier; simply remove the stock unit, bolt in your new Heretic high-performance LED upgrade and hit the trail.
Made from 6061 billet aluminum, anodized bright dip black or raw aluminum for custom colors. Each light consists of 4 CREE XT-E LEDs and Heretic's proprietary chipset. For durability each body features a double o-ring design to keep out water, moisture and dust. ALL OF OUR PRODUCTS ARE MANUFACTURED AND ASSEMBLED IN SLC, UTAH AKA the good old USA!
- 2500 lumen ea. pod 10,000 total
- High beam
- Low beam
- .8 lbs.
- (16) 5 watt LEDs
- Full 80 watt
-Amber lens available
Heretic Studio Limited Lifetime Warranty
Heretic Studio warrants that this product will be free from defects in material and workmanship. If you believe your product is defective, it must be returned for inspection. After inspection, we will verify that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will determine whether the product will be repaired or replaced in accordance with our Limited Lifetime Warranty*.
To begin your warranty claim:
You must have a Return Merchandise Authorization (RMA) number. To get your RMA number, please contact our warranty department by phone at 801-725-4824 Once you have an RMA number, the product must be shipped back to Heretic Studio 1168 W. 500 N. #500, Centerville, UT 84014 Please include a copy of your original invoice (proof of purchase) if you have it, or a return address and contact information. Please be sure that your RMA number is clearly marked on your documentation as well as on the outside of the packaging used for shipping. Please include a short note on the problem you are experiencing.
By completing the steps above, this will ensure faster processing of your claim so that Heretic can get your product back to you as quickly as possible.
*Heretic Studio Limited Lifetime Warranty:
If Heretic Studio determines, in its sole discretion, that your product is defective in material or workmanship, we will honor your warranty claim. In some cases, the product will be replaced depending on the specific timeframe of the purchase. If the product is repaired, all parts and labor will be covered. Billet body, bezel, and end mounts are covered under our lifetime warranty.
For any powder coated or anodized products – 2 year warranty on all powder coat or anodized finish. We use the highest quality materials available. Depending on environment, powder coat and anodizing can fade and is not considered a defect.
All electrical components have a 2-year limited warranty
Heretic Studio, at its sole discretion, will determine the proper handling of all warranty claims. All warranties, expressed or implied, are void if our warranty claim department determines that there is sufficient evidence of one or more of the following:
1. Negligence: Improper installation, improper use, etc. 2. Abuse: Road hazards, Damage beyond the limits of "normal wear and tear." 3. Unauthorized Repair: Repair service performed by an unauthorized service center. 4. Seal Tampering: Removal of bezel or bezel screws will compromise the integrity of the watertight seal.