High Lifter Polaris RZR 900 Control Arm Set (Rear Raked Upper and Lower)

DESCRIPTION

High Lifter Polaris RZR 900 Control Arm Set (Rear Raked Upper and Lower)

Whether you ride in deep mud or over rocky trails, the need for stronger control arms with added ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and lack the added ground clearance needed for challenging trails. High Lifter has solved your problem by designing tough control arms, twice as strong as your stock arms, with the added ground clearance you need for all terrains and bigger tires.

High Lifter arms maximize ground clearance by strategically arching the lower control arms while following the angle of the axle for maximum clearance, axle protection, and visual appeal. Don’t be fooled with too much arch that puts your axles into greater risk of damage. Our precision manufacturing process ensures each control arm installs exactly like the factory arm. Depending on the model, most kits will have the High Lifter logo precision cut into the bracing.

Installation is made easy with our step by step and multi-image instructions. During installation, you can use stock bushings and ball joints for easy installation. Even better, High Lifter will install your ball joints before shipping. (See our control arms with preinstalled ball joints.)

Always check for bearings, bushings, ball joints, and brake wear before installation and replace if needed. We always recommend checking these parts before you start your installation to save time and get back on the trail sooner. See the Replacement Parts Tab to purchase replacement parts as needed.

FEATURES

• 25% larger than average stock arms - Crafted from DOM steel
• Up to 2.5x the wall thickness of an average stock arms
• Grease fittings included for most models
• Added ground clearance featuring bends that maximize clearance and axle protection
• Most stock powder coat colors available in stock
• Easy to install and maintain
• Limited Lifetime Warranty

NOTE

Important:

• If you are purchasing this control arm set for a 2016-2017 Polaris General or 2017 RZR S 900/1000 you must also purchase part # BK-HLP-P-1.
• For exact fitment that does not require replacement bushings for a 2016-2017 Polaris General or 2017 RZR S 900/1000 you must purchase part # MCRRA-GEN1.

FITMENT

• 2016 Polaris RZR 900 S EPS
• 2016 Polaris RZR 1000 S
• 2016 Polaris RZR 900 4 EPS
• 2016 Polaris RZR 900 S BASE
• 2015 Polaris RZR 900 S
• 2015 Polaris RZR 900 S EPS
• 2015 Polaris RZR 900 4 EPS