Rough Country Honda Pioneer 1000 / 1000-5 Electric Auto-Tilt Front Windshield (Glass)
Maximum Durability and Visibility: Say hello to a whole new view with Rough Country's Auto-Tilt Glass Windshield for the Honda Pioneer 1000 / 1000-5. With its DOT-approved glass and sturdy construction, this windshield is less likely to crack or break, even when driving through rough terrain. The Auto-Tilt Glass Windshield for Honda Pioneer is the perfect accessory for your off-road vehicle, giving you unobstructed visibility. Our windshield is built to make your ride safer, so you can focus on the trail ahead.
Heavy-Duty Reliability: The Auto-Tilt Windshield is installed in a heavy-duty metal frame with UV and scratch-resistant powder coating that can withstand all weather conditions. And with weather seal protection, the glass will stay in excellent condition for years to come. It features an easy-to-use rocker switch, so you can open the windshield slightly for minimum airflow or fully open it for maximum airflow. The push-button control with dual linear actuators is so easy to use that you can even adjust mid-ride. The glass is built for long-lasting reliability because the rugged design of your Pioneer deserves a windshield that is just as tough.
Installation: Rough Country's new Auto-Tilt Glass Windshield can be installed on Honda Pioneer models for a clear view and added protection. The windshield comes with the hardware needed for an easy install that includes some minor drilling.
Warranty: Rough Country's Auto-tilt Glass Windshield is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty, give yourself peace of mind when using Rough Country's products!
Features
- Precision Fitment: Overall frame dimensions measure 50.75 inches wide and 29.5 inches tall for a clean, factory style install on Honda Pioneer models
- Full Glass Viewing Area: Glass panel measures 44.66 inches wide and 21.75 inches tall for excellent forward visibility
- Heavy Duty Metal Frame: Built from durable steel and finished with a UV and scratch resistant powder coat for long lasting protection
- DOT Approved Safety Glass: Scratch and impact resistant glass provides confidence on the trail and around the property
- Electric Tilt Function: Electrically actuated windshield allows precise position control for light airflow or fully open ventilation
- Push Button Operation: Open and close the windshield effortlessly with the touch of a button
- Weather Sealing Edge Trim: Integrated edge seal presses against the vehicle frame to block out most dust, wind, and water
- Simple Installation: Designed for an easy install with minimal tools required
Specifications
Cylinder
- Operating Voltage: 12V system compatible with Honda Pioneer electrical systems
- Stroke Range: Adjustable stroke length from approximately 382 mm to 586 mm
- Lifting Force: Rated at 410N with maximum support capacity up to 45 kg
- Operating Speed: Moves at 10 mm per second under no load
- Weather Resistance: IP65 rated for reliable performance in wet and dusty environments
- Operating Temperature Range: Designed to operate in temperatures from 23 to 122 degrees Fahrenheit
- Current Draw: 5 amps at full load
Includes
- (1) Windshield Frame
- (1) Hinge Support
- (1) Driver Side Hinge
- (1) Passenger Side Hinge
- (1) Driver Side Actuator Bracket
- (1) Passenger Side Actuator Bracket
- (1) Glass
- (2) Actuators
- Glass Retainers
- Seals
Fitment
- 2016-2025 Honda SXS1000M3 Pioneer 1000
- 2016-2025 Honda SXS1000M5 Pioneer 1000-5
- 2016-2025 Honda SXS1000M5 Pioneer 1000-5 Deluxe
- 2017-2019 Honda SXS1000M3 Pioneer 1000 Limited Edition
- 2017-2021 Honda SXS1000M5 Pioneer 1000-5 Limited Edition
- 2020-2025 Honda SXS1000M3 Pioneer 1000 Deluxe
- 2023-2025 Honda SXS10M6 Pioneer 1000-6 Deluxe Crew
Notes
- Fits with most factory roofs but in some cases requires the roof to be trimmed ¼ to 3/8” along the front edge to clear windshield movement.
- Does NOT fit factory roofs with plastic leaver snap clamps
- For ease of installation the Rough Country Nutsert Installation Tool Kit is recommended
Rough Country (About)
Rough Country is proudly American-born and based. Our products are designed, engineered, tested, and assembled in the USA. We’re committed to delivering the quality, reliability, and performance American drivers expect, whether they’re hitting the pavement or heading off the grid. While some materials are sourced globally, our foundation, focus, and operations remain right here at home. Rough Country is a leading manufacturer and distributor of off-road accessories and suspension systems. Built on a foundation of American values and rooted in Tennessee, we use our expertise of trucks, Jeeps, and UTVs to help people drive their passions further— to conquer every road and trail, whether smooth or rugged, across the globe.