Shock Therapy Can-Am Defender Bump Steer Delete Tie Rod Kit (BSD)
BSD™ Tie rod kit does wonders for your Can-Am Defender. Through rigorous testing of our shop car, we found that the Defender had a lot of steering wheel feedback. After cycling the front suspension we found a good amount of bump steer in the factory system. Bump steer is a change in toe setting (front of tires closer together than the rear of the tires) through the cycle of front suspension travel. The best set up is as close to zero toe change as possible. If your front tires change toe setting they are essentially doing the same thing as you turning the steering wheel slightly on every bump you hit. Bump steer is one of the biggest contributors to steering wheel feedback, twitchy drive ability, excessive front end wear and worn out forearms from trying to keep the car straight. So in an effort to eliminate all of these things we developed our BSD™ (bump steer delete™) tie rod kit for the Defender. Our kit relocates the outer tie rod pivot point which changes the front end geometry. With the bump steer removed the car is much easier to drive, steer and control. Your front end parts will last longer. Your car will drive more predictably. Your forearms will have no arm pump. The whole driving experience will become easier. Don't wait, install our BSD™ Tie Rod Kit today
Features
This kit is designed to fix the geometry of the factory arm configuration. All after market a arms configurations produce a different amount of bump steer. ***bump steer must be measured prior to installation of the kit
Note
The factory car has ZERO adjust ability for alignment other than toe set. Caster and Camber can NOT be adjusted. Toe adjustment with our BSD kit will not affect any other aspect of the alignment since nothing else is adjustable.
Shock Therapy (About)
Dominating the off-road industry as the premier suspension tuning company, Shock Therapy Suspension, Inc. has over 25 years of racing experience and data to build upon in order to deliver the highest quality products to their customers –– whether they’re looking for a plush ride on their weekend toy, or a race-winning setup to ride roughshod over the competition. Unlike most other suspension companies, we don’t just rebuild or re-valve shocks, we physically drive, test, research, and develop all we do to achieve the best possible system for the application. We test nearly every model of UTV on the market on our own, private, 5.5 mile test track with one thing in mind: creating the BEST ride possible with quality components. With our suspension expertise, one can exponentially improve their ride quality the minute they bolt a Shock Therapy product on their vehicle.