Snorkel Your ATV Kawasaki MULE 610/SX Outlet only Warrior Riser Snorkel Kit
Description
DESCRIPTION
Our Warrior Riser Snorkel Kits Come Standard with Removable Warrior Wear Tips That Snap-in Easily and Unsnap Easily for Cleaning. Although They Are Not Required to Use with The Warrior Riser, You Will Have Them If and When You Need Them. They Are Easily Cleaned Reusable and Durable for Long Time Use. The Water Repellent Material Is from Outerwears. Your Warrior Wear Will Come Unglued So You Have the Option of Custom Painting or Hydro Graphics Dipping Your Parts to Match Your Machine. Easily Glued with Loctite Stick'N Seal Glue. You May Choose to Glue Them Together with The Water Repellent Pre-Filter Material, Or to Glue them Together Without. Your Choice. The CVT Outlet Should Not Have the Water Repellent Material in Place. The Instructions with Your Kit Contains All Information on Your Warrior Wear Tips.
Stop staring at the hole that is too deep for you to ”send it!” A snorkel kit will move your vent tube to a higher level so you can push through higher water levels. Due to the vent tube being moved, the snorkel can provide clean, dry air through the engine and other parts needing venting on ATVs/UTVs such as clutches, differentials, transmission, carburetors, and fuel tanks. Get your machine snorkeled with Snorkel Your ATV Snorkels so you can tackle the deep waters!
FEATURES
- This Snorkel kit comes with our Patented Warrior Risers & removable snap in Warrior Wear Pre filter Tips
- Warrior Wear pre filter tips come unglued for easy painting and gives you the choice of using the water repellent material or not
- Warrior Risers have built in Vent Line Slots for properly snorkeling the vent lines
- Warrior Risers have side mounted built in slide connections for securing and locking your Warrior Risers together cleanly
- Rubber boot connections for easy disassembly
INCLUDES
- All SYA Snorkel kits come with detailed instructions and Color pictures for an easy installation
- This is a 1.5" CVT Outlet only Snorkel kit
- This kit contains one 1.5" riser.
- The air intake and cvt inlet are already ran to the roll cage from the factory and do not need extending. This kit is for the CVT outlet and all vent lines only.
- Comes with Vent lines and connectors
- This is a full and complete snorkel kit
NOTE
- No Tuning or jetting needed with our kits
- You have to cut/trim some plastic to install most Snorkel kits.
FITMENT
- 2016 Kawasaki Mule 610 4x4 XC
- 2016 Kawasaki Mule 610 4x4 XC SE
- 2016 Kawasaki Mule 610 4x4 SE
- 2016 Kawasaki Mule 610 4x4
- 2022 Kawasaki Mule SX
- 2022 Kawasaki Mule SX 4x4 FI
- 2022 Kawasaki Mule SX 4x4 XC FI
- 2022 Kawasaki Mule SX 4x4 XC LE FI
- 2023 Kawasaki Mule SX
- 2023 Kawasaki Mule SX 4x4 FI
- 2023 Kawasaki Mule SX 4x4 XC FI
- 2023 Kawasaki Mule SX 4x4 XC LE FI
- 2011 Kawasaki MULE 610 4x4
- 2010 Kawasaki MULE 610 4x4
- 2009 Kawasaki MULE 610 4x4
- 2008 Kawasaki MULE 610 4x4
- 2007 Kawasaki MULE 610 4x4
- 2006 Kawasaki MULE 610 4x4
- 2005 Kawasaki MULE 610 4x4
- 2012 Kawasaki MULE 610 4x4 XC
- 2013 Kawasaki MULE 610 4x4
- 2013 Kawasaki MULE 610 4x4 XC
- 2012 Kawasaki Mule 610 4x4
- 2014 Kawasaki Mule 610 4x4 XC
- 2014 Kawasaki Mule 610 4x4
- 2015 Kawasaki Mule 610 4x4
- 2015 Kawasaki Mule 610 4x4 XC
- 2017 Kawasaki Mule 610 4x4 XC
- 2017 Kawasaki Mule 610 4x4 XC SE
- 2017 Kawasaki Mule 610 4x4 SX
- 2017 Kawasaki Mule 610 4x4 SX SE
- 2017 Kawasaki Mule 610 SX
- 2018 Kawasaki Mule SX 4x4
- 2018 Kawasaki Mule SX SE 4x4
- 2018 Kawasaki Mule SX
- 2019 Kawasaki Mule SX 4x4
- 2019 Kawasaki Mule SX SE 4x4
- 2019 Kawasaki Mule SX
- 2020 Kawasaki Mule SX
- 2020 Kawasaki Mule SX 4x4
- 2020 Kawasaki Mule SX SE 4x4
- 2020 Kawasaki Mule SX XC SE 4x4
- 2020 Kawasaki Mule SX XC LE 4x4
- 2021 Kawasaki Mule SX
- 2021 Kawasaki Mule SX 4x4 FI
- 2021 Kawasaki Mule SX 4x4 SE FI
- 2021 Kawasaki Mule SX 4x4 XC FI
- 2021 Kawasaki Mule SX 4x4 XC Camo FI
- 2021 Kawasaki Mule SX 4x4 XC LE FI