Turn Offroad 2021+ Ford Bronco Billet Uniball Upper Control Arm Kit (Non Bronco Raptor)
Built for serious off-road performance and precision handling, the Turn Offroad Billet Uniball Upper Control Arm Kit for the 2021–2026 Ford Bronco transforms suspension capability with race-inspired engineering and innovative design. This premium upgrade is designed to correct geometry, increase durability, and unlock greater articulation for Broncos running stock height or lifts up to 3 inches.
Premium Suspension Upgrade for the Ford Bronco
The Turn Offroad Billet Upper Control Arms are engineered specifically for 2021+ Ford Bronco 2-door and 4-door models (excluding Raptor), delivering a significant improvement over factory control arms. Stock components are limited when it comes to aggressive off-road driving or lifted applications, often restricting articulation and compromising alignment.
This kit addresses those limitations by optimizing suspension geometry, ensuring proper alignment across a range of lift heights while enhancing overall vehicle stability and control.
Advanced Sealed Uniball Technology
A standout feature of this kit is its first-of-its-kind sealed uniball design, developed to overcome the traditional drawbacks of exposed uniballs.
- Fully sealed using the OEM ball joint boot combined with a removable dust cap
- Protection from dirt, mud, and debris in harsh environments
- Significantly extended component lifespan
- Reduced maintenance compared to conventional uniball setups
- Customizable dust cap for a personalized finish
This innovative approach delivers the strength and articulation benefits of a uniball while maintaining long-term reliability in real-world off-road conditions.
Race-Grade Heim Joints for Precision Adjustability
The inclusion of adjustable heim joint ends allows for fine-tuned alignment and suspension dialing, giving drivers greater control over handling characteristics.
- Precise camber and caster adjustments
- Improved steering response and road feel
- Increased suspension articulation for uneven terrain
- Enhanced durability under extreme stress
These race-grade components are built to perform under the same demanding conditions found in competitive off-road environments.
Billet Aluminum 6061-T6 Construction
Each control arm is machined from high-strength 6061-T6 billet aluminum, offering an ideal balance of strength, weight savings, and corrosion resistance.
- Reduced unsprung weight for improved suspension responsiveness
- Exceptional structural integrity for off-road impacts
- AAodized finish for long-term durability and visual appeal
This construction ensures the arms can withstand aggressive use without sacrificing performance or longevity.
Optimized for Lifted and Stock Applications
Designed to support 0” to 3” suspension lifts, this kit maintains proper suspension geometry across a wide range of setups.
- Eliminates excessive ball joint angles common with lifted Broncos
- Improves tire contact and traction
- Reduces stress on suspension components
- Supports both daily driving and extreme off-road use
Easy Installation and Direct Fit
Turn Offroad engineered this kit for a straightforward installation process, minimizing the need for modifications.
- Direct bolt-on design
- Compatible with factory mounting points
- Ideal for DIY enthusiasts and professional installers alike
Performance You Can Feel On and Off the Trail
The Turn Offroad Billet Uniball Upper Control Arm Kit delivers a measurable upgrade in strength, articulation, and control. Whether navigating technical trails, desert terrain, or daily driving, it enhances confidence behind the wheel by maintaining optimal suspension performance under any condition.
This is not just a replacement part—it’s a complete suspension refinement designed to push the Ford Bronco beyond factory limitations.
Features
- Supports 0”–3” lift kits
- Sealed uniball design for low maintenance and longevity
- Adjustable heim joints for precise alignment
- CNC-machined billet aluminum 6061-T6 construction
- Race-grade components for extreme durability
- Improved articulation and suspension travel
- Corrosion-resistant anodized finish
- Simple, bolt-on installation
Fitment
- Fits 2021–2026 Ford Bronco (2 & 4 Door, non-Raptor)
Turn Offroad (About)
Turn Offroad was founded by Cole McMath, whose family has been crafting off-road parts for generations, built on the belief that the best products are born from passion, experience, and purpose. The company specializes in premium parts and accessories for Ford Bronco and Jeep platforms, offering a comprehensive lineup that includes hard tops, suspension systems, portal gear lifts, and a wide range of accessories designed to maximize off-road capability. Operating a full-scale production facility with over 35 skilled craftsmen, Turn Offroad expanded in late 2025 to include steel and aluminum manufacturing with CNC mills, fiber lasers, and robotic welders, allowing nearly every component to be built in-house. Every product goes through a multi-stage testing process that replicates the harshest real-world conditions, evaluated by industry professionals and real off-roaders before earning the Turn Offroad badge — making them a trusted name among enthusiasts who demand performance without compromise.