AJK Offroad Tubing Adapter / Threaded Bung (1" ID)

AJK Offroad tubing adapters are precision CNC-machined for optimal performance on your off road rig. The inside threads are threaded completely through every threaded bung for max holding strength. You don’t need to worry about threads not holding, each tubing adapter is machined from 1018 hex steel. Each threaded bung has a sizable weld chamfer and also a lead chamfer for ease of welding in your tubing. Each left hand threaded tubing bung has a small identification ring so you know what one is left hand and which one is right hand.  These are great for four-link bars and hydraulic assist steering.

*TIP* When welding, you can overheat the tubing adapter and your rod end will not fit in correctly. Make sure welder is set to the correct settings. Too much heat can warp threads. Check your threads before you weld the tubing adapter into the tube.

Features

• Great for link bars and steering bars
• Easy to adjust and tighten your jam nut with the hex
• American made 1018 steel
• Inside threads are threaded completely through
• 1.5” hex nut width

Additional Information