Description
CT Race Worx Polaris Pro R Boxed Trailing Arms
Experience the next level of off-road performance with Polaris Pro R Boxed High Clearance Lower A-Arms. Designed for the demanding trails and rugged terrains, these heavy-duty A-Arms provide superior strength and durability. The boxed design enhances ground clearance, allowing you to conquer obstacles with ease. Crafted with precision engineering, these A-Arms optimize suspension geometry for improved handling and control. With their corrosion-resistant construction, they are built to withstand the toughest conditions. Upgrade your Polaris Pro R and elevate your off-road adventures with these high-performance boxed lower A-Arms.
Features
- Boxed Design: Built on a proven design used throughout the product line.
- Construction: Made with a mix of .115" and .1875" Grade 50 steel.
- Material Thickness: Lower portion of the arm is layered, totaling 5/16" thickness.
- Increased Height: The arm raises the bottom nearly 3" to the toe link pocket without compromising strength.
- Durability: Designed to withstand rough treatment and abuse.
- Sealed Brake Line Bungs: The brake line bungs have a sealed bottom and use 6mm hardware provided.
- Logo: The CT logo on the side of the arm is cut from stainless steel and can be left bare, polished, or powder coated.
- Shock and Sway Bar Mount: The mount spans a large distance across the top of the arm, acting as a gusset to distribute force and add strength.
- Removable Back Strap Piece: The back strap piece housing the radius rods is removable for easier installation.
- Mud Flap Placement: The stock mud flaps are used and placed slightly closer to the tire to reduce debris accumulation.
- Toe Link Pocket: Designed to fit with the toe link and factory toe link, accommodating a maximum toe link diameter of 1.25".
- Optional Skid Plate: The trailing arm has the ability to add an optional skid plate.
- Skid Plate Design: The skid plates are made from 3/8" UHMW with formed sides for extra protection and to prevent snagging.
- Hardware: Countersunk 10mm hardware and 7075 aluminum washers retain the skid plate, providing a flat bottom to the arm.
As always the a arms have a no BS lifetime warranty. The uniballs and spindle pin do not have a lifetime warranty.
Note
If you plan on ordering this part bare and are going to powder coat it, you can NOT let the bore of either uniball (shock or spindle) pocket get sand blasted or powder coated. These parts get machined to an extremely tight tolerance and get measured with a bore gauge, if that does happen, you won't get the uniballs in straight or the snap rings in the grooves. If this happens CT Race Worx will NOT warranty the item due to improper fitment of the uniballs.