DS18 Audio Luxury 6.5” 150W RMS 4-Ohm 2-Way Marine Coaxial Speaker with Digital LED Lights and Flush Magnetic Mount Grille
The NXL-LXY6 gives your marine or powersports build everything it could ask for from a speaker: high-output sound, weatherproof strength, and a factory-style finish with digital LED’s.
Powerful Coaxial Setup
Built around a 6.5” woofer + 1” floating bullet tweeter, this speaker delivers full-range audio from 40Hz–20kHz, perfectly-tuned for full-spectrum sound in outdoor environments. The neodymium magnet on the tweeter gives it the power to cut through wind and engine noise, while the ferrite woofer brings clean midbass you could feel throughout your entire vehicle.
Flush-Mount Magnetic Grille
The flush-fit magnetic grille gives your install a clean, high-end finish. Magnets mean faster installs and cleaner removals if you ever need to service the speaker. And because it’s connected your grille stays tight when the adventure gets rough.
Real-World Ready
With an IP65 rating, UV-treated cone and rubber surround, the NXL-LXY6 is ready for any all elements adventure.
Digital LED Glow
A full digital LED ring sits behind the cone, creating a backlit glow that matches your vibe. Add DS18’s LC-DRM (sold separately) to unlock full color control.
Features
- 6.5” 2-Way Marine-Grade Coaxial Speaker
- IP65 Water & UV Resistant Construction
- Floating Bullet Tweeter with Neodymium Magnet
- Digital LED Ring (LC-DRM Compatible)
- Flush-Mount Magnetic Grille for Clean Install
Specs
General
- Nominal Diameter: 6.5" / 165mm
- Nominal Impedance: 4 ohms
- RMS Power Handling: 150W
- MAX Power Handling: 300W
- Sensitivity (1W/1m): 95 dB
- Frequency Response: 60Hz–20KHz
- Recommended High-Pass Crossover: 70Hz
- Sold in: Pair
Body / Features
- Grill Type: PC + Stainless Steel
- Marine Grade Type: IP65
- RGB LED: Yes, digital LED integrated behind cone
- Digital LED Chip Type: 1815S
- Basket Material: Injection Molded Composite ASA with UV Protection Coating
- Color / Finish: Matte Black, White
Woofer
- Voice Coil Diameter: 1.5" / 38.6mm
- Voice Coil Former Material: Glass Fiber
- Winding Material: CCAW
- Cone Material: PPI
- Surround Material: Rubber
- Basket Material: PC
- Magnet Material: Ferrite + Neodymium
- Magnet Weight: 13 oz + 1.1 oz
Tweeter
- Voice Coil Diameter: 1" / 25.5mm
- Voice Coil Former Material: Kapton
- Winding Material: CCAW
- Diaphragm Material: Aluminium
- Magnet Material: Neodymium (N35H)
- Magnet Weight: 0.4 oz
Thiele & Small Parameters
- Equivalent Volume (Vas): 3.15L / 0.11 ft³
- Excursion (One Way): 3mm
- Free Air Resonance (Fs): 88Hz
- Mechanical Factor (Qms): 7.497
- Electrical Factor (Qes): 1.205
- Total Factor (Qts): 1.038
- Moving Mass (Mms): 16.603g
- Compliance (Cms): 0.1679 mm/N
- BL Factor (BL): 5.138
- Voice Coil Inductance (Le): 1.4mH
- Diaphragm Area (Sd): 114.99 cm²
- DC Resistance (Re): 3.2 Ohms
- Efficiency Bandwidth Product (EBP): 78.8
Speaker Measurements
- Overall Diameter: 8.35" / 212mm
- Overall Depth: 3.8" / 96.5mm
- Front Mount Baffle Cutout: 6.77" / 172mm
- Mounting Depth: 3.41" / 86.5mm
- Motor Diameter: 3.54" / 90mm
DS18 Audio (About)
DS18 is a leading electronics manufacturer that focuses on professional audio equipment for all vehicles. Our products are designed and engineered in the USA: and, we have access to multiple factories in Korea, Brazil, and China, with select items assembled here in the USA. We are headquartered in Miami, FL, and are one of the fastest-growing companies in the area. Our company creates more than 200 unique pieces of professional-grade audio equipment every year. These products are distributed both nationally and internationally, with international distribution channels reaching more than 89 countries. Our consistency and dedication to our craft have netted us revenue growth levels of 300 percent over the last 3 years. We specialize in the professional development of speakers, receivers, amplifiers, components, and a plethora of other products for car audio and home audio systems.