High Lifter 2009-14 Polaris RZR 800 S Front Forward Upper and Lower Control Arms (Black)
In Stock
Description
Whether you ride in deep mud or over rocky trails, the need for stronger control arms with added ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and lack the added ground clearance needed for challenging trails.
High Lifter 2009-14 Polaris RZR 800 S Front Forward Upper and Lower Control Arms (Black) (MCFFA-RZRS-B) has solved your problem by designing tough control arms, twice as strong as your stock arms, with the added ground clearance you need for all terrains and bigger tires. Optional preinstalled ball joints.
Features
- 25% larger than average stock arms - Crafted from 1 ¼” DOM steel
- Up to 2.5x the wall thickness of an average stock arms - .188” wall thickness
- Grease fittings included for most modelsasas
- Added ground clearance featuring bends that maximize clearance and axle protection
- Most stock powder coat colors available in stock
- Easy to install and maintain
- Limited Lifetime Warranty
Fitment
- 2011 Polaris RZR 800 S
- 2010 Polaris RZR 800 S
- 2011 Polaris RZR 800 4
- 2010 Polaris RZR 800 4
- 2009 Polaris RZR 800 S
- 2012 Polaris RZR 800 S
- 2012 Polaris RZR 800 4
- 2013 Polaris RZR 800 S
- 2013 Polaris RZR 800 4
- 2013 Polaris RZR 800 4 EPS
- 2014 Polaris RZR 800 S
- 2014 Polaris RZR 800 4
Notes
Tire Fitment
-
Polaris RZR 800 "S" 2 seater - Up to 29.5"
-
Polaris RZR 800 "4" 4 seater - Up to 29.5"
Tire Fitment with Lift Kit
- Polaris RZR 800 "S" 2 seater - Up to 31"
- Polaris RZR 800 "4" 4 seater - Up to 31"
This kit comes with replacement tie rods. The factory tie rod ends are reused so be sure to check/inspect your factory tie rod ends and replace them if needed when installing the new tie rods included in this kit.