Power Tank Tire Pressure Gauge Hands Free 60 PSI 24 Inch Hose

Power Tank Tire Pressure Gauge Hands Free 60 PSI 24 Inch Hose (TPG-8060B)

Power Tank Tire Pressure Gauges are like no other on the market and are a perfect complement to Power Tank Monster Valves or any wheel with dual valve stems. Monitor second to second changes in pressure so you don't waste a second releasing the trigger to check the tire pressure or overshooting your target.

Power Tank start with a large, easy to read gauge. This one is a 60 psi liquid analog gauge filled with silicone for vibration resistance and so the needle won't slow down in cold temperatures like a common glycerin filled gauge does. The rubber boot is there to protect the gauge from accidental drops. This gauge is good for tires with a max fill pressure of 55 psi or below. 

Between the gauge and the clip-on air chuck is 2 ft. of durable stainless steel braided hose. You can clip on to your valve stem, then set the gauge down where it's easily readable or hold it close to your eyes so you don't have to crane your neck to get a tire pressure reading. 

Other stand-out features are a built-in bleed button for getting tire pressures spot-on and a removable air chuck. A removable air chuck allows you to clip in directly to an air source to air up. A life-saver if you forgot your Monster Chuck at home and need to air up through a standard valve stem. If you clip the air chuck onto your valve stem without an air hose connected, it will air down your tire hands free. You will have to be careful not to overshoot your target pressure but it sure beats crouching down with a twig pressed in your valve stem. 

Features

• 60 psi Analog
• +/- 1.2 psi Accuracy
• 24 in. Whip Hose
• Bleed Button on All Units
• Comes with removable chuck to fill tires through normal valve stem
• Comes with removable chuck to fill tires through normal valve stem