null
SB Filters

S&B Filters Arctic Wildcat XX Can-Am Maverick Replacement Filter

In Stock
  • S&B Filters Arctic Wildcat XX Can-Am Maverick Replacement Filter SB Filters UTVS0022530 UTV Source
  • SandB Filters Arctic Wildcat XX Can-Am Maverick Replacement Filter 66-6003LG
  • SandB Filters Arctic Wildcat XX Can-Am Maverick Replacement Filter 66-6003LG
  • SandB Filters Arctic Wildcat XX Can-Am Maverick Replacement Filter 66-6003LG
  • SandB Filters Arctic Wildcat XX Can-Am Maverick Replacement Filter 66-6003LG
  • SandB Filters Arctic Wildcat XX Can-Am Maverick Replacement Filter 66-6003LG
  • SandB Filters Arctic Wildcat XX Can-Am Maverick Replacement Filter 66-6003LG
$75.00
Part #:
UTVS0022530
UPC:
841372037993
Manufacturer Part #:
66-6003LG
Primary Supplier:
S&B Filters
Adding to cart… category.add_cart_announcement

Description

S&B Filters Arctic Wildcat XX Can-Am Maverick Replacement Filter (66-6003LG)

The S&B Filters Arctic Wildcat XX Can-Am Maverick Replacement Filter provides filter flows better than stock and it is durable and easy to clean filters.

Features

FILTER MAINTENANCE

CLEANING THIS FILTER IS AS EASY AS 1, 2, 3

If you don't have our Particle Separator installed, no worries though, our new filter is super easy to clean. Just follow the steps below to breathe new life into your dirty filter. If the filter media or rubber looks damaged, do not re-use.

STEP 1

First, make sure to wear protective eyewear throughout the cleaning process. Remove the dirty air filter from the UTV's airbox and lightly tap the top several times on a hard service to knock out any debris, being careful not to bend the cage or pleats.

STEP 2

Blow out the filter from the inside out using the nozzle no closer than 1" from media. Continue to move nozzle taking care not to focus it on one specific area. Use an OSHA approved regulator at no more than 30psi.

STEP 3

Use the nozzle to blow out the outside of the filter an angle to remove any large debris that was not removed in Step 1 and 2. Be careful not to blow debris back into media. Then blow out once more from the inside out.

OPTIONAL STEPS

If you want to maximize the airflow of your filter, we recommend completing the following steps every other time you service your filter.

STEP 4

Use a standard garden hose turned up to 75% its max strength and wash the filter from the inside out.

STEP 5

Wash the outside of the filter to remove any remaining debris. Repeat steps 4 and 5 until the media is returned close to its original white color. Allow the filter to dry before use. A small fan can be used to accelerate the process. Do not use hot air.

You should dispose of the filter after servicing it 10 times in order to ensure your engine is properly protected. Prior to you reinstalling your air filter, carefully inspect the cage, pleats and the silicone rubber for any damage. If you see any damage to the cage, pleats or rubber, DO NOT use the filter!

Fitment

  • 2020-2023 ARCTIC CAT WILDCAT XX UTV
  • 2018-2019 TEXTRON WILDCAT XX UTV
  • 2015-2017 CAN-AM MAVERICK MAX TURBO UTV
  • 2015-2017 CAN-AM MAVERICK MAX X DS TURBO UTV
  • 2015-2017 CAN-AM MAVERICK MAX X RS TURBO UTV
  • 2015-2017 CAN-AM MAVERICK TURBO UTV
  • 2015-2017 CAN-AM MAVERICK X DS TURBO UTV
  • 2015-2017 CAN-AM MAVERICK X RS TURBO UTV

S&B Filters (About)

THE BEST PRODUCT

A deep knowledge of the manufacturing process is required in order to continually improve on a product's design, functionality and cost. For these reasons, S&B is committed to manufacturing as much of the process as possible in our own plants. The more we control, the more we understand. Ultimately, this drives a better product to customers at a greater value.

WE CARE ABOUT OUR CUSTOMERS

There are no executive offices at S&B. Management sits right in the middle of our customer & technical support department to keep a constant pulse on any issues that might arise and to make sure we are exceeding the expectations of our customers.

OUR DEALERS LOVE US

Most of our product line can be easily installed if you are good with a wrench, but we also have a talented group of dealers for those looking for a turn-key solution. They run our products on their personal vehicles and know S&B stands behind its products which is why most would rather lose a sale than install a competitor's product.

View AllClose

Questions