Description
S&B Filters Helmet Particle Separator (76-6001) | UTVSource.com
With no filter to clog, start and end your ride with the same great airflow. Based on technology used by the military, our helmet air pumper system removes 99.36% of the dust without a filter to provide you with consistent airflow throughout your ride.
Plus, everything you need for RZR, X3 and Wild Cat installations now comes all in one box.
Includes
- (1) Helmet Particle Separator Assembly
- (2) 6' Flexible Pumper Hoses
- (4) Bar Mount Kits (1.75", 1.85", 2" and 2.5")
- (3) Hose Hanger Mount Kits (1.75", 1.85", 2")
Notes
- Kawasaki Teryx and Honda Talon installations require a 1.5" diameter bar mount. You can order at Frequently Bought Together section on the side for only $30.00.
STAY COOL THROUGHOUT YOUR ENTIRE RIDE
End your ride with the same amount of cool clean air to your helmet that you started with. The Helmet Particle Separator removes 99.36% of the dust from the air without the use of a filter. With no filter to clog, you get the same great airflow throughout your entire ride.
DEMAND BETTER
With conventional helmet blowers, you start the day or race with good airflow, but throughout the day, the filter starts to clog and choke off the airflow to your helmet right when you need it most. With S&B’s Helmet Particle Separator, you get the same great airflow to your helmet all the time as there is no filter to clog.
That’s right, the Helmet Particle Separator removes 99.36% of the dust without even having a filter. Using the same technology used by military helicopters to land in the desert, the vortexes spin the air throwing the dust particles to the side wall of the vortexes where it is ejected by the scavenge fan.
DEMAND BETTER
With conventional helmet blowers, you start the day or race with good airflow, but throughout the day, the filter starts to clog and choke off the airflow to your helmet right when you need it most. With S&B’s Helmet Particle Separator, you get the same great airflow to your helmet all the time as there is no filter to clog.
That’s right, the Helmet Particle Separator removes 99.36% of the dust without even having a filter. Using the same technology used by military helicopters to land in the desert, the vortexes spin the air throwing the dust particles to the side wall of the vortexes where it is ejected by the scavenge fan.
FRESH AIR FOR 2 HELMETS
With dual port outlets, you can feed fresh air to two helmets. Riding solo? The Helmet Particle separator comes with rubber caps integrated into the system to prevent loss and seal the unused outlet. Helmets not included!
EFFICIENCY RATE
Even without a traditional filter, S&B's Helmet Particle Separator maintains a high efficiency rate in order to keep clean air pumping into your helmet. ISO Coarse Dust was utilized for testing in a climate controlled laboratory with one (1) 6-ft hose attached.
AIR PRESSURE RATE
The best way to evaluate systems is to compare the CFM rate as the system ingests dusty air as shown above. That being said, our competition likes to refer to pressure, so we have included those numbers as well. Using a digital manometer, we have measured the max air pressure produced by fresh air helmet blowers. Max air pressure is measured when the air flow is O and the blower pushes the air in an enclosed chamber. The pressure is then measured in the enclosed chamber.
HELMET NOISE COMPARISON
Our Helmet Particle Separator keeps you cool with a minimal amount of "air noise," so you can stay focused on the trail. The variable speed control knob allows you to adjust the CFM rate if you want an even quieter ride. Sound was measured using an Extech model 407764 sound meter with the microphone in the ear pocket of an Impact Air Draft OS20 Helmet (Size XL) worn by a mannequin head.