S&B Filters Polaris RZR Pro R Replacement Filter 2.0L | UTVSource.com
S&B'S HUGE DRY, CLEANABLE FILTER FLOWS THE BEST.
Using our proprietary dry synthetic media, our RZR filter flows better than stock and provides more air to the filter.
FILTER MAINTENANCE CLEANING THIS FILTER IS AS EASY AS 1, 2, 3
Our RZR filter is super easy to clean. Just follow the steps below to breathe new life into your dirty filter. If the filter media or rubber looks damaged, do not reuse it.
STEP 1
First, make sure to wear protective eyewear throughout the cleaning process. Remove the dirty air filter from the UTV's airbox and lightly tap the top several times on a hard service to knock out any debris, being careful not to bend the cage or pleats.
STEP 2
Blow out the filter from the inside out using the nozzle no closer than 1" from the media. Continue to move the nozzle taking care not to focus it on one specific area. Use an OSHA-approved regulator at no more than 30psi.
STEP 3
Use the nozzle to blow out the outside of the filter at an angle to remove any large debris that was not removed in Steps 1 and 2. Be careful not to blow debris back into the media. Then blow out once more from the inside out.
STEP 4
Use a standard garden hose turned up to 75% of its max strength and wash the filter from the inside out.
STEP 5
Wash the outside of the filter to remove the remaining debris. Repeat steps 4 and 5 until the media is returned close to its original white color. Allow the filter to dry before use. A small fan can be used to accelerate the process. Do not use hot air.
Fitment
- 2022 - 2025 Polaris RZR Pro R
S&B Filters (About)
THE BEST PRODUCT
A deep knowledge of the manufacturing process is required in order to continually improve on a product's design, functionality and cost. For these reasons, S&B is committed to manufacturing as much of the process as possible in our own plants. The more we control, the more we understand. Ultimately, this drives a better product to customers at a greater value.
WE CARE ABOUT OUR CUSTOMERS
There are no executive offices at S&B. Management sits right in the middle of our customer & technical support department to keep a constant pulse on any issues that might arise and to make sure we are exceeding the expectations of our customers.
OUR DEALERS LOVE US
Most of our product line can be easily installed if you are good with a wrench, but we also have a talented group of dealers for those looking for a turn-key solution. They run our products on their personal vehicles and know S&B stands behind its products which is why most would rather lose a sale than install a competitor's product.