Snorkel Your ATV Polaris Ranger 570/500-ETX Mid-Size Warrior Riser Snorkel Kit

DESCRIPTION

Our Warrior Riser Snorkel Kits Come Standard with Removable Warrior Wear Tips That Snap-in Easily and Unsnap Easily for Cleaning. Although They Are Not Required to Use with The Warrior Riser, You Will Have Them If and When You Need Them. They Are Easily Cleaned Reusable and Durable for Long Time Use. The Water Repellent Material Is from Outerwears. Your Warrior Wear Will Come Unglued So You Have the Option of Custom Painting or Hydro Graphics Dipping Your Parts to Match Your Machine. Easily Glued with Loctite Stick'N Seal Glue. You May Choose to Glue Them Together with The Water Repellent Pre-Filter Material, Or to Glue them Together Without. Your Choice. The CVT Outlet Should Not Have the Water Repellent Material in Place. The Instructions with Your Kit Contains All Information on Your Warrior Wear Tips.

Stop staring at the hole that is too deep for you to ”send it!” A snorkel kit will move your vent tube to a higher level so you can push through higher water levels. Due to the vent tube being moved, the snorkel can provide clean, dry air through the engine and other parts needing venting on ATVs/UTVs such as clutches, differentials, transmission, carburetors, and fuel tanks. Get your machine snorkeled with Snorkel Your ATV Snorkels so you can tackle the deep waters!

FEATURES

• This Snorkel kit comes with our Patented Warrior Risers & removable snap in Warrior Wear Pre Filter Tips
• Warrior Wear Pre Filter Tips come unglued for easy painting and gives you the choice of using the water repellent material or not
• Warrior Risers have built in Vent Line Slots for properly snorkeling the vent lines
• Warrior Risers have side mounted built in slide connections for securing and locking your Warrior Risers together cleanly
• Rubber boot connections for easy disassembly
• All SYA Snorkel kits come with detailed instructions and Color pictures for an easy installation
• This is a 2" Snorkel kit - All hard pipe kit - 100% glued and assembled for an easy install

INCLUDES

• This kit contains three 2" risers.
• Comes with Vent lines and connectors
• This is a full and complete snorkel kit

NOTES

• No Tuning or jetting needed with our kits
• You have to cut/trim some plastic to install most Snorkel kits.

FITMENT

• 2017 Polaris Ranger 570 Crew Mid-Size
• 2016 Polaris Ranger 570 Mid-Size EPS
• 2016 Polaris Ranger 570 Crew Mid-Size
• 2014 Polaris Ranger 570 Mid-Size
• 2015 Polaris Ranger 570 Mid-Size
• 2015 Polaris Ranger 570 Crew Mid-Size
• 2015 Polaris Ranger 570 Crew Mid-Size EPS
• 2017 Polaris Ranger 500 Mid-Size
• 2017 Polaris Ranger 570 Mid-Size
• 2017 Polaris Ranger 570 Mid-Size EPS
• 2018 Polaris Ranger 500 Mid-Size
• 2018 Polaris Ranger 570 Mid-Size
• 2018 Polaris Ranger 570-4 Crew Mid-Size
• 2018 Polaris Ranger 570-6 Crew Mid-Size
• 2019 Polaris Ranger 500 Mid-Size
• 2019 Polaris Ranger 570 Mid-Size
• 2019 Polaris Ranger 570-4 Crew Mid-Size
• 2019 Polaris Ranger 570-6 Crew Mid-Size
• 2020 Polaris Ranger 570 Mid Size