null
SpeedWerx

SpeedWerx Arctic Cat Widcat XX Q6 Series Stainless Steel Slip-On Exhaust

In stock
  • SpeedWerx Arctic Cat Widcat XX Q6 Series Stainless Steel Slip-On Exhaust UTVS0068765
  • SpeedWerx Arctic Cat Widcat XX Q6 Series Stainless Steel Slip-On Exhaust UTVS0068765
  • SpeedWerx Arctic Cat Widcat XX Q6 Series Stainless Steel Slip-On Exhaust UTVS0068765
$579.95
Part #:
UTVS0068765
Manufacturer Part #:
Q6-TWCXX-ATVP
Adding to cart… category.add_cart_announcement

Description

Description

Speedwerx Q6 Series Slip-On Exhaust

The Q6 Series Slip-On Exhaust is designed to increase power, add acceleration and throttle response, lose weight and be maintenance free all while being only slightly louder than stock. With this exhaust, you are also eliminating the catalytic converter that is inside the OEM muffler- that means more air flow for better performance, and less heat retention for cooler engine compartment temps. It has a different tone or pitch with only a few db increase over stock, so it's perfect for those looking for a better sounding exhaust with a more moderate sound level.

Muffler Comparison:

Stock 97dB @4500 rpm - 112dB @9000rpm - 20.8lbs with heat shields
L2 106dB @4500 rpm - 114dB @9000 rpm - 6.2lbs installed = 14.6 lbs savings
Q6 102dB @4500 rpm - 111dB @9000 rpm - 9.9lbs installed = 10.9 lbs savings

The difference in the dB readings at 4500 on the Stock and Q6 parts can be misleading as the sound of the Q6 is much more friendly and tolerable compared to stock. The Q6 also has a different tone compared to stock- the stock rattle / vibration sound is gone with the Q6- this does not show up on the decibel meter but anyone who is sensitive to this sound will notice the difference right away.

Check out our Stainless Steel Exhaust Header for even more power, or our Exterminator Kits for a complete performance package!

Features

The Q6 Series Slip-On Exhaust is designed to increase power, add acceleration and throttle response, lose weight and be maintenance free all while being only slightly louder than stock. 

  • 10.9 lb. weight savings
  • 1 HP Gain No EFI changes required (Using a Power Commander or ECU remap will add a slight increase in power)
  • Full Stainless Steel Construction Stock-like Sound Levels
  • Built-in Spark Arrestor
  • No Internal Packing (Maintenance Free)
  • All Q6 mufflers now come standard with turndown outlets to clear accessory bumpers

Fitment

  • Arctic Cat Widcat XX

Note

 WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov    See Proposition 65 Information for more on this Consumer Product Exposure Warning for residents of California.

These items are intended for closed-course competition only. Alteration of emissions-related components can constitute violation of federal and/or state laws. Substantial fines and penalties can result if used for other than closed-course competition use.

View AllClose

Videos

View AllClose

Questions