SpeedWerx Arctic Cat Wildcat Sport Stage 1 Exterminator Kit

Our Exterminator Kits are designed to offer you the biggest bang for your buck! What we do is put together a group of components that we have found to work the best on each and every machine to get the best performance at a reasonable cost.  The Stage 1 Exterminator Kit for the Arctic Cat Wildcat Sport comes with our Speedwerx L2 Stainless Steel Slip-On Exhaust, Hypershift Clutch Kit and a Dynojet Power Commander V Fuel and Ignition Controller.

Speedwerx L2 Stainless Steel Slip-On Muffler- This L2 (Light n' Loud) Series Stainless Steel Slip-On Exhaust is designed to increase power, add acceleration and throttle response, lose weight, and give your machine a new deeper, throatier sound. With this exhaust, you are also eliminating the catalytic converter that is inside the OEM muffler- that means more air flow for better performance, and less heat retention for cooler engine compartment temps.

These mufflers have a brushed stainless steel shell with a welded inlet end cap, and a steel core with packing material and a built-in spark arrestor. They are 100% rebuildable with all inner parts being removable. They come standard with a polished finish aluminum end cap, but you can also choose an anodized aluminum end cap in black, red, blue, gold, or green or a stainless steel turn down at no extra charge.

This muffler sheds some serious weight too. The stock 2016-2017 muffler weighs in at 17lbs, and the L2 comes in at just 5.5lbs- that's a loss off 11.5lbs!

Speedwerx Hypershift Clutch Kit- Our Hypershift Clutch Kit includes our 6-Series Machined Weights with an Adjustment Kit, a new Primary Spring, and our H5 Alloy Secondary Spring. This kit was designed and rigorously tested by the staff at Speedwerx to insure that it will increase your machine’s acceleration, backshift and all-around performance.

Dynojet Power Commander 6 Fuel and Ignition Controller-  The PC6 allows us to maximize performance by tuning the fuel injection and ignition timing parameters, as well as re-setting the rev limiter to a safe and reliable 8500 RPM which will give you more top end speed potential compared to the stock 8000 rpm rev limit. Our custom tuned map ensures maximum trouble free power using 91+ Octane premium pump fuel. It's also easily user-tunable, so if you decide you want to upgrade to the Stage 2 Exterminator spec down the road, all you have to do is bolt on our Stanless Steel Exhaust Header, upload a new map in the PCV, and go out and let it rip!

Options: Secondary Spring Delete, Q6 Muffler

Secondary Spring Delete: If you already have one of our H5 Alloy Secondary Springs, you can choose to delete it from the kit.

Q6 Muffler: We can substitute the Q6 Muffler for the L2 Stainless Steel Muffler. This muffler is designed to increase power, add acceleration and throttle response, lose weight and be maintenance free all while being only slightly louder than stock. It's full stainless steel construction with no internal packing means it's built to last, and the built-in spark arrestor and a low decibel rating (94-95 dB vs stock at 90-91dB) means it's very trail-friendly too. With this exhaust, you are also eliminating the catalytic converter that is inside the OEM muffler- that means more air flow for better performance, and less heat retention for cooler engine compartment temps. Update: All Q6 mufflers now come standard with turndown outlets to clear accessory bumpers