SuperATV Arctic Cat Wildcat XX 6" Portal Gear Lift

SuperATV Arctic Cat Wildcat XX 6" Portal Gear Lift (PGH6-11-76)

Gen 3 Portals are Geared for All

SuperATV’s GDP 6” Portal Gear Lift for the Textron Wildcat XX gives you a lift and a gear reduction in one box. Get the clearance to run bigger tires and the torque you need to turn them. The lift and gear reduction are in the hub which means they maintain suspension geometry and reduce drivetrain stress. Customize by choosing between a 30% or 45% gear reduction and selecting a cast or billet aluminum housing. GDP portals are truly Geared for All.

45% - Perfect for Mud

Install big 6” portals with a 45% gear reduction to get clearance for huge tires and a massive boost in torque. It’ll turn your monster tires like they’re stock and take your Wildcat through the biggest, thickest mud holes you can find. Mud doesn’t stand a chance.

45% - Perfect for Rocks

Get tons of torque to crawl over any rock or boulder you can find by installing a 6” portal box with a 45% gear reduction. With that much power, rock shelves will feel like speed bumps and boulders feel like pebbles. 6” of ground clearance means more room for bigger tires and less belly dragging through rock gardens.

30% – Perfect for Everything

A 30% gear reduction lets you turn bigger tires and gives you the versatility to run mud, dominate trails and hills, and maintain high speed on the road. It gets your power to the ground® to make your UTV punchy and powerful no matter how you roll.

Better Gears

The gears are precision ground and made with 9310 billet steel alloy for high strength and high speed. They’re cool and quiet even when hammering down the throttle on the road, and they have strength to withstand every ride.

Stronger Housings by Design

GDP housing designs are backed by unmatched real-world experience, can be confident whether cast or USA-made billet aluminum.

• Our housings are reinforced in all the right places
• They’re built with better oil flow and gearing forces in mind
• There are no gimmicks and no vents because vents do more harm than good—we know because we tested them

Advanced Gaskets and Seals

Whether you go with cast or billet, both housings use:

• Advanced Thermo-Tork® gaskets with excellent oil resistance and a lower deterioration rate than Kevlar gaskets
• A sealed input gear and double-lipped output seal
• 100% sealing coverage throughout so you can forget about oil leaks

Features

• Available with billet or cast aluminum housing
• 9310 alloy billet steel precision ground gears are cool and quiet
• 1.5 in. diameter 4340 hardened steel drive shaft
• No leak bearings and seals
• Universal hub fits all major bolt patterns
• Comes complete with all hardware, backing plates, brake lines, and instructions

Wheel Requirements

• 18” or larger wheel required
• 18" Cannot exceed 4-1/2" backspacing
• 20" Cannot exceed 5” backspacing

Fitment

• Textron Wildcat XX : 2018+
• Tracker XTR1000 : 2020+

NOTE

• Wheels need to have a center hole of at least 3.25" (82.55mm) or require a 1” wheel spacer.