SuperATV Can-Am Maverick 8" Portal Gear Lift Kit

SuperATV Can-Am Maverick 8" Portal Gear Lift Kit

Gear Down and Go Big

SuperATV’s GDP 8” Portal Gear Lift for the Can-Am Maverick is geared down so you can go big. It gives you a lift and a 45% gear reduction in one box. Get the clearance to run bigger tires and the torque you need to turn them. The lift and gear reduction are in the hub, so they maintain suspension geometry and reduce drivetrain stress. Big clearance, big torque, and big tires — with GDP you can unleash the beast.

Perfect for Mud

With 8” portals and a 45% gear reduction, you get clearance for huge tires and a massive boost in torque. With all that torque, big tires won’t slow you down, and with all that lift, you’ll roll through bounty holes like they’re mud puddles. SuperATV 8” portals are made for mud.

Perfect for Rocks

Get tons of torque to crawl over any rock or boulder you can find by installing an 8” GDP portal box with a 45% gear reduction. More power means you can take on bigger boulders and steeper shelves. With all that clearance, you can install huge tires and never get high-centered. Clearance and power open a world of rock crawling possibilities.

Better Gears

SuperATV gears are precision ground and made with 9310 billet steel alloy. They’re designed to take all the torque and abuse you can give them without chipping teeth or blowing up. SuperATV precise design and manufacturing mean they’re cool and quiet even when you’re hammering down the throttle in the mud hole.

Billet Housings

Choose billet or cast aluminum housings to finish your portals. Billet housings are CNC-machined right here in Madison, Indiana and give you increased strength and consistency over cast. Plus, there’s nothing quite like spraying the mud off your pristine billet housings.

Reinforce Your Frame with a Frame Stiffener

SuperATV highly recommend running a SuperATV Frame Stiffener with your 8" Portal Gear Lift. A frame stiffener reinforces your frame enough to let you ride your 8" portals with monster tires and no worries.

• 100% sealing coverage throughout so you can forget about oil leaks

Can-Am Maverick Portal Gear Reduction Recommendations

Features

• 1.5” Forward offset
• 9310 billet steel alloy precision ground gears are cool and quiet
• Available with billet or cast aluminum housing
• 1.5 in. diameter 4340 hardened steel drive shaft
• No leak bearings and seals
• Universal hub fits all major bolt patterns
• Comes complete with all hardware, backing plates, brakes lines, and instructions

Wheel Requirements

• 22” or larger wheel required
• Wheels cannot exceed 5” backspacing

Fitment

SuperATV Part Number 7-32-101 Will Fit

• Can-Am Maverick Standard : 2013-2015
• Can-Am Maverick X RS : 2013-2015
• Can-Am Maverick X RS-DPS : 2014-2015
• Can-Am Maverick X XC : 2014-2015

SuperATV Part Number 7-32-103 Will Fit

• Can-Am Maverick Standard : 2016+
• Can-Am Maverick DPS : 2016+
• Can-Am Maverick XC : 2016+
• Can-Am Maverick X XC : 2016+

SuperATV Part Number 7-32-104 Will Fit

• Can-Am Maverick Max Standard : 2014-2015
• Can-Am Maverick Max XRS : 2014-2015
• Can-Am Maverick Max XRS-DPS : 2014-2015

SuperATV Part Number 7-32-102 Will Fit

• Can-Am Maverick X MR : 2014-2015

SuperATV Part Number 7-51-101 Will Fit

• Can-Am Maverick Turbo : 2016-2017
• Can-Am Maverick X DS : 2015-2016
• Can-Am Maverick X DS Turbo : 2015-2016
• Can-Am Maverick X MR : 2016+
• Can-Am Maverick X RS Turbo : 2016

SuperATV Part Number 7-51-102 Will Fit

• Can-Am Maverick MAX Turbo : 2016-2017
• Can-Am Maverick MAX X DS : 2015-2017
• Can-Am Maverick MAX X DS Turbo : 2015-2017
• Can-Am Maverick MAX DPS : 2016+
• Can-Am Maverick MAX X RS Turbo : 2016-2017
• Can-Am Maverick MAX X MR : 2017+

NOTE

• Wheels need to have a center hole of at least 3.25" (82.55mm) or require a 1” wheel spacer.