SuperATV Honda Pioneer 1000 High Clearance 1.5" Offset Rear A-Arms

SuperATV Honda Pioneer 1000 High Clearance 1.5" Offset Rear A-Arms (AA-H-PIO1K-1.5-R-HC-02)

The Suspension Upgrade You Need

Your Honda Pioneer 1000 was built for working hard and playing harder. But sometimes, that stock suspension just isn’t up for the task at hand. That’s why SuperATV designed these High Clearance 1.5” Rear Offset A-Arms. The unique bend design delivers extra clearance and the rear offset extends your wheelbase, allowing you to run bigger tires without even installing a lift kit! And if strength is what you need, you’re in the right place. They’re made with 1.25” tubing that’s not only larger, but also more dependable than your stock arms. You’re not getting the most out of your Pioneer until you’ve upgraded with SuperATV.

No More Getting Hung Up

Would you rather have some additional ground clearance or room for bigger tires? With our rear offset A-arms, you get both! The unique bend design delivers an extra 2” of ground clearance, and a 1.5” rear offset extends your wheelbase. Not only does this give you room for bigger tires, but it will provide more stability to your machine, too. Installing these A-arms on your Pioneer will have you sailing over the obstacles that used to get you down.

Stronger, Smarter Design

We make these rear control arms using 1.25” tubing to ensure that they’re not only bigger, but also stronger than your stock arms. They’re finished with a durable powder coating that makes them more durable, long-lasting, and good looking. We also include UHMW bushings for free, and they’re preinstalled! These self-lubricating bushings are nearly indestructible and virtually frictionless, so you can stay riding for longer. You’ll save time, money, and hassle.

All SuperATV A-arms come with a lifetime warranty, allowing you to ride as hard as you want without worry about breaking something. No matter what happens, SuperATV has got you covered.

Industry-Leading Adjustable Pivot Blocks

Your rear offset A-arms also come with industry-leading adjustable pivot blocks. Being able to adjust your alignment gives you total control over your camber, so you’ll never have to worry about premature tire wear, no matter how hard you ride. We make sure they’re preadjusted to stock specifications right out of the box, so you only have to mess with them if you want to.

Fitment

• Honda Pioneer 1000 : 2016+
• Honda Pioneer 1000-5 : 2016+

NOTE:

• If you want to run a lift kit with these offset A-arms, you must have Rhino Brand Axles. Stock axles will bind
• If running a lift kit with these A-arms plus stock wheels in the rear, wheel spacers are required

Features

• Adds 1.5” of rear offset
• Fit up to 28” tires with 1.5” offset front A-arms
• Note: At full compression tire may rub the trim and front bumper.
• 1.25” tubing is 25% larger than stock
• Adjustable pivot blocks for full camber adjustability
• Includes high-quality UHMW bushings at no extra cost
• UV-resistant powder coat finish
• Easy to install
• Backed by a lifetime warranty