SuperATV Polaris Ranger XP 900 High Clearance 1.5" Forward Offset A-Arms

SuperATV Polaris Ranger XP 900 High Clearance 1.5" Forward Offset A-Arms | UTVSource.com

Upgrade with Forward Offset A-Arms
There’s nothing like the thrill of taking on a new trail—and there’s nothing as frustrating as rerouting around every rut and bump because of your Ranger’s low clearance. Upgrade to SuperATV’s Polaris Ranger XP 900 High Clearance 1.5" Forward Offset A-Arms. They give you room for 28.5” tires without a lift and the clever bend design gives you 1.5” of additional ground clearance to take on rough terrain with confidence. Run up to 28.5” tires Adds 1.5” of forward offset Bigger tubing than stock
Expanded Wheelbase and 28.5” Tires
The 1.5” forward offset improves your tire clearance and expands your wheelbase. That gives you room for 28.5” tires without a lift kit! Bigger tires and greater stability—who would say no to that?

High-Clearance Bends Increase Ground Clearance
SuperATV A-arms are designed with high-clearance bends, helping you avoid debris and obstacles on the trail. 1.5” of additional ground clearance will give you the confidence to take on the rough routes you avoided before.

1.25” Diameter Tubing Is Bigger than Stock
SuperATV use 1.25” diameter tubing that’s 25% larger than stock. The .138” sidewalls make the tubing even stronger. With these beefy A-arms, your Ranger is ready to take on any terrain.

Backed by a Lifetime Warranty
SuperATV believe in the strength and the performance of these A-arms. That’s why we back them with a lifetime warranty. Go nuts—we’ve got you covered.

Adjustable Pivot Blocks Let You Customize Your Camber
These Ranger control arms come with adjustable pivot blocks so you can tune your camber to perfection. They come set to stock specs, but you can adjust them to avoid premature tire wear when you add heavy accessories or a lift kit.

Super Duty 300M Ball Joints
SuperATV took the strongest ball joint material on the market—300M grade steel—and combined it with our superior design engineering to make the strongest ball joint on the market. It comes with an easily-accessible grease zerk and an adjustable steel-on-steel design, making it easy to keep your ball joints maintained and flexible. At 2.25x stronger than stock, you won’t find a better ball joint.

Keller Ball Joints
Keller Ball Joints use a two-piece design that eliminates the need for a snap ring. They thread onto your A-arms like a nut and bolt, which makes these ball joints virtually impossible to pull out. The high-quality chromoly steel stud combined with an advanced tool-steel body makes them perfect for bigger machines, bigger tires, and bigger rides. And since they’re greaseable and rebuildable, you can keep them running perfectly.

Heavy Duty Ball Joints
SuperATV heavy-duty ball joints are designed with ultimate performance and convenience in mind. Whether you’re doing flips or chasing hills, our proprietary blend of hardened 4340 VAR steel and zinc plating means this ball joint can take it. Our heavy-duty ball joints also come with easily-accessible grease zerks and an adjustable design. Extensive lab and field testing shows that our heavy duty ball joints can withstand double the pressure of an OEM ball joint!

Standard Duty Ball Joints
SuperATV’s standard replacement ball joints give you OEM quality without the OEM price! They’re made with hardened chromoly steel studs and housings—all zinc plated—for superior strength and longevity. All of this delivers a ball joint that’s as strong as or stronger than stock.

FEATURES

• Adds 1.5” of forward offset
• Fit up to 28.5” tires (may rub at full compression)
• 1.25” tubing is 25% larger than stock
• Adjustable lower pivot block for full camber adjustability
• Includes steering stop kit
• Utilizes stock A-arm bushings
• UV-resistant powder coat finish
• Easy to install
• Backed by a lifetime warranty

FITMENT

• Polaris Ranger XP 900 : 2013-2019
• Polaris Ranger XP 900 Crew : 2014-2019

NOTE

• You must re-use your stock ball joints if you don’t select a pre-installed ball joint at checkout.

2016 Polaris Ranger XP 900 High Lifter Edition stock-length axles and tie rods are not compatible with this kit. This kit requires Ranger 900 stock-length axles and tie rods. The axles and tie rod kit below are compatible with this kit:

Axles:

• Rhino 2.0 Brand Axle
• Rhino Brand Axle
• ADR Brand Axle

Tie Rods:

• Heavy-duty tie rod kit

WARNING: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.

⚠ California Proposition 65 Warning ⚠
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.

ADDITIONAL INFO

UTV High Clearance Forward Offset A-Arms are specialized components designed to enhance the performance and handling of your Utility Terrain Vehicle (UTV). These A-Arms are specifically engineered for UTV models and provide both a forward offset and increased ground clearance, improving vehicle stability, turning radius, and obstacle clearance. With their robust construction, High Clearance Forward Offset A-Arms not only enhance the off-road capabilities of your UTV but also contribute to its overall durability and safety. Upgrade your UTV with High Clearance Forward Offset A-Arms for improved handling and off-road performance. Enjoy the added control and safety that come with these top-quality components.

SuperATV (About)

SuperATV is a reputable company known for its expertise in manufacturing high-quality aftermarket parts for UTVs. With a strong commitment to innovation, durability, and customer satisfaction, SuperATV has established itself as a reliable provider of top-notch UTV accessories and upgrades. Their extensive range of products includes lift kits, suspension components, wheels, tires, bumpers, winches, and much more.

SuperATV's dedication to quality is evident in their meticulous attention to detail and use of premium materials. Each product is designed and engineered to withstand the demands of off-road adventures, ensuring exceptional performance and longevity. Whether you're seeking improved handling, enhanced protection, or increased functionality, SuperATV offers a wide array of options to suit your specific needs.

Customers can trust SuperATV for their UTV aftermarket needs due to the company's unwavering commitment to providing reliable, high-quality products. With a team of knowledgeable experts and a focus on customer satisfaction, SuperATV ensures that their parts are not only of the highest quality but also easy to install and backed by excellent customer support.
When it comes to UTV aftermarket parts, SuperATV stands out as a reliable and trustworthy brand, delivering products that enhance the performance, durability, and overall enjoyment of your UTV.