SuperATV Polaris RZR XP 900 RackBoss 2.0 Rack and Pinion

SuperATV Polaris RZR XP 900 RackBoss 2.0 Rack and Pinion | UTVSource.com

RackBoss 2.0 Reinvented the Rack
The fate of every rack is to wear down over time, get sloppy, and make your steering responsiveness feel terrible. That all changes with RackBoss 2.0. It’s an evolution of our original RackBoss and designed to be the strongest, most durable rack on the market. It uses X24 Tech—a dual-bushing design that reduces wear by over 50% compared to stock. You can’t find that kind of improvement anywhere else. Get SuperATV’s RackBoss 2.0 Rack and Pinion installed on your Polaris RZR XP 900 so you can turn massive tires on dangerous terrain. No matter how hard or long you ride, this rack keeps you in control.

Less Wear and Tear with Our Dual-Bushing Design
What makes RackBoss 2.0 so good at preventing slop? It’s engineered with X24 Tech—heavy-duty PTFE bushings at both ends of the rack that remove play from the internals. Reducing play also keeps the tension spring nearly motionless. With little to no unintended internal movement, this RZR 900 steering rack can turn massive tires through heavy rides and hard hits and still stay in like-new condition for years longer than the next best rack. And with the built-in grease fitting, you can push fresh grease through after you go deep in mud or water.

Swaged Tube Tie Rods
These steel swaged tube tie rods are lightweight but super tough. The flared-out, swaged design boosts the strength of the 7/8” diameter tubing. They’re bolstered with better tie rod ends too. They have huge 16 mm rack threads and 14 mm rod threads make them the toughest in the industry. They’ll keep you on track where others fail.

Solid Steel Bar Tie Rods
SuperATV solid steel bar tie rods are big and beefy for the reliability you need. They’re made with 1” diameter steel bars that are paired with bigger, better tie rods you’ll love—3/4” outer heim joint tie rods and rebuildable inner tie rods that use 3/4” rod threads and 16 mm rack threads. Altogether, they’re built for hard hits, big tires, and wild rides.

Looking for a More Traditional Rack?
If you don’t need all the benefits of a RackBoss 2.0, you can dial it back to our original, more traditional RackBoss 1.0. It uses the same beefy housing but doesn’t include the extra PTFE bushing. Our RackBoss 1.0 Rack and Pinion comes with steel swaged tubes that are tougher than stock and perfect for casual riders looking for an upgrade. It’s finished with our tough 14 mm inner and outer tie rod ends so you can ride harder without worry.

FEATURES

RackBoss 2.0 Features:

• Heavy-duty dual PTFE bushings:
• Designed with X24 Tech
• Prevents wear
• Reduces slop
• Improves overall durability
• Available tie rod options:
• Steel swaged tube
• Solid steel bar
• Solid steel tie rods use:
• 3/4” outer tie rod ends
• Rebuildable inner tie rod ends that use 3/4” rod threads and 16 mm rack threads
• Swaged tube tie rods use:
• 14 mm outer tie rod ends
• Inner tie rod ends that use M14 rod threads and 16 mm rack threads
• 65% larger housing than stock
• Over 50% less wear than OEM after 15,000 cycles
• Grease fitting for rack gears

RackBoss 1.0 Features:

• Uses a single PTFE bushing
• 65% larger housing than stock
• Less wear than stock
• Uses steel swaged tie rods
• 14 mm inner and outer tie rod ends
• Includes all hardware and instructions

FITMENT

• Polaris RZR XP 900 : 2011-2014
• Polaris RZR XP 4 900 : 2012-2014
• Polaris RZR 900 : 2015-2020
• Polaris RZR 900 XC : 2015-2017
• Polaris RZR 900 Trail : 2015-2020

Replaces OEM Part #: 1824259, 1823993

NOTE

WARNING: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.

⚠ California Proposition 65 Warning ⚠
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.

ADDITIONAL INFO

The UTV rack and pinion system is a steering mechanism that converts rotational motion into linear motion, allowing for precise control and maneuverability of the vehicle. This system consists of a rack (linear gear) and a pinion (rotating gear) that work together to steer the UTV by translating the driver's input into movement of the wheels. The rack and pinion setup is commonly used in UTVs for its efficiency, responsiveness, and ease of maintenance, making it a crucial component for smooth and reliable steering performance on various terrains.

SuperATV (About)

SuperATV is a reputable company known for its expertise in manufacturing high-quality aftermarket parts for UTVs. With a strong commitment to innovation, durability, and customer satisfaction, SuperATV has established itself as a reliable provider of top-notch UTV accessories and upgrades. Their extensive range of products includes lift kits, suspension components, wheels, tires, bumpers, winches, and much more.

SuperATV's dedication to quality is evident in their meticulous attention to detail and use of premium materials. Each product is designed and engineered to withstand the demands of off-road adventures, ensuring exceptional performance and longevity. Whether you're seeking improved handling, enhanced protection, or increased functionality, SuperATV offers a wide array of options to suit your specific needs.

Customers can trust SuperATV for their UTV aftermarket needs due to the company's unwavering commitment to providing reliable, high-quality products. With a team of knowledgeable experts and a focus on customer satisfaction, SuperATV ensures that their parts are not only of the highest quality but also easy to install and backed by excellent customer support.
When it comes to UTV aftermarket parts, SuperATV stands out as a reliable and trustworthy brand, delivering products that enhance the performance, durability, and overall enjoyment of your UTV.