Description
Features our brand new I-Beam Sand Tray for improved stability and lighter weight. The 400P is a larger powerful portable tire inflator kit that can inflate up to a 35-inch tire from 0 to 30 PSI in less than 6 minutes. Used and approved of by off road enthusiasts worldwide, the 400P can save you when you’re miles from home.
Features
- Thermal Overload Protector
- 5-in-1 Inflator/Deflator Air Hose with Inline 100 PSI Gauge
- I-beam Sand Tray (PN 40043)
- Diamond-Plate Sand Tray (PN 40050)
- Deluxe Dual Compartment Carry Bag
- 40-amp Inline Fuse Holder
- Dual Battery Clamps
- 3 pc. Inflation Tips Kit
Specifications
- 2-Volt / 24-Volt
- Permanent Magnetic Motor
- Duty Cycle: 33% @ 100 PSI
- Max. Working Pressure: 150 PSI
- Max. 12V Amp Draw: 30-Amps
- Max. 24V Amp Draw: 15-Amps
- Ingress Protection Rating: IP54
- Dimensions: 10.87″L x 5.83″W x 7.48″H
- Net Weight: 10.40 lbs.
- Power Cord Length: 8 ft.
- Air Hose Length: 25 ft.
Performance Data
| 12-VOLT COMPRESSOR | |||||
|---|---|---|---|---|---|
| PSI | CFM | A | BAR | LPM | A |
| 0 | 2.30 | 17 | 0 | 65.1 | 17 |
| 10 | 2.13 | 19 | 1.0 | 58.4 | 20 |
| 20 | 1.98 | 21 | 2.0 | 53.0 | 23 |
| 30 | 1.86 | 23 | 3.0 | 48.5 | 24 |
| 40 | 1.75 | 24 | 4.0 | 44.2 | 26 |
| 50 | 1.64 | 25 | 5.0 | 40.2 | 27 |
| 60 | 1.54 | 26 | 6.0 | 37.0 | 28 |
| 70 | 1.44 | 27 | 7.0 | 33.3 | 29 |
| 80 | 1.37 | 27 | 8.0 | 30.1 | 28 |
| 90 | 1.28 | 28 | 9.0 | 27.0 | 28 |
| 100 | 1.19 | 29 | 10.0 | 22.1 | 27 |
| 110 | 1.11 | 29 | |||
| 120 | 1.04 | 28 | |||
| 130 | 0.95 | 28 | |||
| 140 | 0.85 | 27 | |||
| 150 | 0.71 | 27 | |||
* Supply Voltage: 13.8 Volts
| 24-VOLT COMPRESSOR | |||||
|---|---|---|---|---|---|
| PSI | CFM | A | BAR | LPM | A |
| 0 | 2.54 | 10 | 0 | 72.0 | 10 |
| 10 | 2.26 | 11 | 1.0 | 62.2 | 11 |
| 20 | 2.12 | 12 | 2.0 | 55.4 | 12 |
| 30 | 1.94 | 13 | 3.0 | 50.7 | 13 |
| 40 | 1.84 | 13 | 4.0 | 46.3 | 14 |
| 50 | 1.70 | 14 | 5.0 | 43.4 | 14 |
| 60 | 1.62 | 14 | 6.0 | 40.5 | 14 |
| 70 | 1.55 | 14 | 7.0 | 35.7 | 14 |
| 80 | 1.48 | 14 | 8.0 | 32.1 | 14 |
| 90 | 1.41 | 15 | 9.0 | 27.0 | 14 |
| 100 | 1.27 | 14 | 10.0 | 22.1 | 14 |
| 110 | 1.20 | 14 | |||
| 120 | 1.09 | 14 | |||
| 130 | 0.95 | 14 | |||
| 140 | 0.85 | 14 | |||
| 150 | 0.71 | 14 | |||
* Supply Voltage: 28.0 Volts
Fill Rates
| 12-VOLT COMPRESSOR | |
|---|---|
| 31″ X 10.5″ | FILL RATE |
| 0 to 30 PSI | 3 min. 00 sec. (± 10 sec.) |
| 15 to 30 PSI | 1 min. 35 sec. (± 05 sec.) |
| 33″ X 12.5″ | FILL RATE |
| 0 to 30 PSI | 4 min. 20 sec. (± 10 sec.) |
| 15 to 30 PSI | 2 min. 05 sec. (± 05 sec.) |
| 35″ X 12.5″ | FILL RATE |
| 0 to 30 PSI | 5 min. 20 sec. (± 15 sec.) |
| 15 to 30 PSI | 2 min. 45 sec. (± 05 sec.) |
| 24-VOLT COMPRESSOR | |
|---|---|
| 31″ X 10.5″ | FILL RATE |
| 0 to 30 PSI | 2 min. 50 sec. (± 05 sec.) |
| 15 to 30 PSI | 1 min. 25 sec. (± 05 sec.) |
| 33″ X 12.5″ | FILL RATE |
| 0 to 30 PSI | 4 min. 00 sec. (± 10 sec.) |
| 15 to 30 PSI | 2 min. 00 sec. (± 05 sec.) |
| 35″ X 12.5″ | FILL RATE |
| 0 to 30 PSI | 5 min. 05 sec. (± 15 sec.) |
| 15 to 30 PSI | 2 min. 40 sec. (± 05 sec.) |
Notes
- The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. – Stow when not in use. Never allow the hose to come into contact with the head of the compressor during use (melting hazard). The use of the included air hose is not recommended in sub zero or freezing conditions. The 400P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 400P does not work with the VIAIR Winterization Kit (P/N 90145).