AJK Offroad Hi-Lift Off Road Mount/Clamp (2.00" ID)

AJK Offroad Hi-Lift Mount/Clamp uses MALE DIAMOND KNURLS for a secure hold on the tube you are clamping.

A male diamond knurl helps hold the clamp in both directions from moving.  We use two ¼-20 SHCS to hold the two pieces together. This clamp can be mounted on any size tubing listed above.  This is a clean way to mount your Hi-Lift on your roll cage, bumper or any other tubing.

You simply take each half of the clamp and bolt each side around the tubing where you want your Hi-Lift to be mounted and tighten the supplied bolts. Then set your Hi-Lift Jack on the two studs protruding from the clamps and use the supplied wing nut to secure your Hi-Lift to the clamp.

AJK machine these Hi-Lift Clamps/brackets in house from 6061-T6 billet aluminum. Every AJK Offroad part is proud to be designed and manufactured in the USA.

Features

• Uses MALE DIAMOND KNURLS
• Made from 6061-T6 Billet Aluminum
• Uses ½” hardened Zinc plated stud with wing nut
• Clamps around tubing using two ¼-20 SHCS
• SOLD INDIVIDUALLY

Additional Information