DS18 Audio 4" Amplified With BT Marine/Wakeboard Tower Speakers
Description
Are you needing really loud tower speakers but have no room for bulky amps or radio? DS18 now has their first tower speaker that has both built in amplifiers and BT modules so all you need is power and ground connections are you are good to go. Perfect but not limited to buggies, 4 wheelers, motorcycles, and marine!
These towers have room for 1.5-2 inch circular bars and can all be linked to the same source. Each built in amp provides 2x40w RMS and 2x120W max power the 4 inch 2 way speakers for loud and clear music where ever you want that's easy to hook up with easy BT pairing with your phone!
Sold as pair
Features
- 4 inch 2 way coaxial speakers for clear loud sound without sacrificing space.
- Built in amplifier that puts out 40w RMS and 120w MAX to each speaker.
- Integrated BT controls to seamlessly pair with your phone and also give you a secondary aux jack option with 2 channel RCA outputs.
- Compatible with the DS18 remote, MXRC for easy to use controls.
- Accommodates tower bars 1.5 - 2 inches and solid design is made for durability while also turning heads.
Key Features
Speakers
- Max Power Handling: 120 Watts x2
- RMS Power Handling: 40 Watts x2
- Frequency Response: 60Hz-20KHz
- Voice Coil Diameter: 1"
- Voice Coil Material: PEPSV
- Impedance: 4 Ohm
- Magnet Weight: 11 Oz
- Magnet Material: Ferrite
Amplifier
- Full Range Class D Stereo Amplifier
- Max Power: 120x2 Watts
- RMS Power: 40x2 Watts
- Power and Ground: 16 GA
- Fuse size: 15a
Great For
- Marine Audio
- Car Audio
- Off road
- DIY Projects
Specifications
| Nominal Diameter | 4” / 101.6mm |
| Total Watts (Peak) | 240W |
| RMS Power @ 4 ohm (Internal Amp) | 2 x 40 W @ 14.4V |
| MAX Power @ 4 ohm (Internal Amp) | 2 x 120 W @ 14.4V |
| Frequency Response | 60Hz-20KHz |
| BODY / FEATURES |
|
| Enclosure Material | Injection PC+ABS |
| Marine Grade Type | IPX5 + UV Stable |
| RGB LED | NO |
| Grill Type | Injection PC+ABS |
| Pair | Yes |
| Clamps | Tube Type Fixed with pads for 1-1/2" to 2" |
| Front Logo | Yes |
| Finish | Matt Black |
| WOOFER SPECIFICATIONS |
|
| Voice Coil Diameter | 1" / 25.4mm |
| Voice Coil Former Material | KSV |
| Cone Material | Injection Molded Polypropylene + UV Compliant |
| Surround Material | Butyl (Rubber) |
| Basket Material | Steel with Black protection coating |
| Magnet Material | Ferrite |
| Magnet Weight | 11 Oz |
| Magnet Diameter | 3.14" / 80mm |
| TWEETER SPECIFICATIONS |
|
| Voice Coil Diameter | 1" / 25mm |
| Voice Coil Former Material | ASV |
| Winding Material | CCAW |
| Type | Dome |
| Diaphragm Material | PEI |
| Magnet Material | Neodymium |
| Magnet Weight | 45g |
| Crossover | 6dB/Oct |
| AMPLIFIER SPECIFICATIONS |
|
| Amplifier Class | Stereo Full Range |
| Amplifier Type | Digital |
| Number of Channels | 2 Channels |
| Minimum Impedance | 4 ohm |
| Signal to Noise Ratio | 127dB |
| Audio Source | BT Audio Streaming V5.0 |
| Power Input Terminal Size | 16 Ga |
| Fuse Size | 15 Amp |
| Wired Remote Control Input | Yes (compatible with MXRC) |
| Thermal Protection | Yes (>75°C / 167°C) |
| Over-Load Protection | Yes |
| DC Output Protection | Yes |
| Short Circuit Output Protection | Yes |
| Voltage Input Protection | Yes (<9.2V / >18V) |
| MEASUREMENT |
|
| Overall Diameter | 5.51" / 140 mm |
| Overall Depth | 8.07" / 205 mm |
| Overall Height | 7.28" / 185 mm with clamp |