Whalen Speed Can-Am Maverick X3 Launch Control Module

Whalen Speed Can-Am Maverick X3 Launch Control Module (111 WSLCMSTD-2SEAT)

The WSRD Launch Control Module(LCM) is designed to allow the machine to have a controlled, consistent launch rpm by cutting ignition at the desired rpm, as well as build boost by controlling ignition retard. This unit can be added to any machine or any ones tuning and allows the user to be able to fine tune the launch rpm and how aggressive the machine will leave. 

The WSRD LCM has the ability to retard up to 40*. The ignition retard allows for more heat in the exhaust which assists the turbos shaft speed creating more boost. 

The WSRD LCM will be sent with our standard setting of 2200 RPM cut with -30* of retard. We also offer a 2700 RPM setting that can come preloaded. This can be modified by the user. With our Max Effort LCM we can configure and assist the user with setup and if using our tune, combine both the LCM and our tuning for best results.

• WSRD Standard 2200 RPM Launch Control Setting

• Requires the KWI Blue Primary Spring (2500 RPM Engagement) found in KWI's AO Clutch Systems

• Other vendor clutching systems will support this with similar engagement springs

• WSRD  Enhanced 2600 RPM Launch Control Setting

• Requires the WSRD | KWI Pink Primary Spring (2900 RPM Engagement) which is listed above as a NEW available option

• Other vendor clutching systems will support this with similar engagement springs

• WSRD Max Effort Launch Control Setting

• Please consult with John prior to purchase

• Supported by KWI Tapp Clutch and STM Powersports high engagement clutch options