CT Race Worx Maverick X3 64" Boxed Upper A Arms (Gen 2)
Description
CT Race Worx Maverick X3 64" Boxed Upper A Arms (Gen 2)
Our Gen 2 arms bring nearly double the strength of our original arms and have no axle shaft clearance limitations.
Our upper a arms bring more to the table than what meets the eye. Our boxed design adds strength to the front of the machine and also more rigidity in design. The shock mounting location have been beefed up a tremendous amount over stock as well which that part of the stock a arm is a known weak spot. What sets these apart from others is the geometry changes that we've made to the arm. Caster has changed and the high speed stability will greatly increase with the machine while not hurting the turning at low speeds. No more fighting to keep the car straight or fight a wondering steering wheel in the choppy stuff. If you want more strength out of your machine, better handling and great styling then these are for you. These will clear the Halo locker!
Arms come with bushings installed (set of 8). If you have factory or non-CT lower arms and need to swap out worn bushings, you can add a set of 8 additional bushings here.
The ramped surface on the top of the spindle will have to be cut off and ground smooth with use of these arms!