CT Race Worx Maverick X3 Front A Arm Bushings (Set of 8)

CT Race Worx Maverick X3 Front A Arm Bushings (Set of 8)

This half set is for customers who purchased either upper or lower CT Race Worx arms (that come with bushings installed) and you need to change out your factory bushings in your other set of arms. Made to work with the stock bushing pins.

Does your X3 have play in the front suspension or are you switching a arms? Here's the chance to eliminate the play and keep that front end tight with the a arm bushings. Machined in house and made from a special blend of thermoplastics, these bushings have incredible wear resistance and are self lubricating that will out last the factory bushings by thousands of miles. While these bushings are self lubricating CT Race Worx did groove the inside of the bushings to allow for grease and to push out any dirt or debris from being in wet or muddy conditions.

These bushings are machined to a tight tolerance and fit stock and the a arms snug. Aftermarket a arms not using build components produced with a tight tolerance may have undesirable fitment.

The bushings come with a lifetime warranty for the original purchaser only, the failed part must be returned to us to inspect.

Damage can occur from switching the bushing from one set of arms to another. If bushing need to be warrantied, markings on the bushings from excessive force while removing the bushing will deny any warranty claim.

Worn bushings must be sent back to us for warranty claim once order has been confirmed, return shipping will not be covered as part of the warranty.

Notes

• This is a HALF SET of 8!!