High Lifter 2016-20 Polaris RZR S 900/S 1000 Big Lift Kit (7") (RCV Axle)

Description 

Bigger. Badder. BOLDER. Take your ATV to the edge with High Lifter’s 7" Big Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 20 years perfecting the ultimate ATV lift kit. The product? The Big Lift Kit is even easier to install with a bolt-on application that consistently measures truer over competitor products.

One of the first areas our team tackled was the steering. Large lifts are known for being difficult to steer. Our solution was superior engineering of steering components and hub location geometry that that provides excellent steering and maneuverability on the trails.

Each lift kit comes with four Outlaw RCV Axles or four Outlaw DHT XL Axles that are custom tuned for use with the 7” High Lifter Lift Kit. 

Features

• Outlaw RCV Axle:

  The Outlaw RCV axles are proudly built and assembled in the USA. Assembled by High Lifter and Manufactured by RCV Performance, the makers of high performance drive line products.

  • The Outlaw RCV uses the RCV Performances patented cage
  • Sliding bars on both ends for increased angle capability
  • Bars, housings, cages, and races made of high strength alloy steel
  • Well established and proven design

Includes

• Heavy duty laser cut rear upper lift/shock relocation brackets
• Four custom heavy duty Max Clearance Control Arms crafted from 1 1/4"x.120 wall DOM tubing, heavy duty support gussets, and shock mounts
• Front and rear heavy duty High Lifter Springs
• Four Outlaw RCV
• Additional brake line kit
• All required hardware and brackets
• Detailed instructions with step-by-step photos

Fitment

• 2016 Polaris RZR 900 S EPS
• 2016 Polaris RZR 1000 S
• 2016 Polaris General 1000 EPS
• 2016 Polaris General 1000 EPS Deluxe
• 2015 Polaris RZR 900 S
• 2015 Polaris RZR 900 S EPS
• 2017 Polaris General 1000 EPS
• 2017 Polaris General 1000 EPS Deluxe
• 2017 Polaris RZR 1000 S EPS
• 2017 Polaris RZR 900 S BASE
• 2017 Polaris RZR 900 S EPS
• 2018 Polaris General 1000 EPS
• 2018 Polaris General 1000 EPS Deluxe
• 2018 Polaris General 1000 EPS Premium
• 2018 Polaris General 1000 EPS Ride Command
• 2018 Polaris RZR 900 S
• 2018 Polaris RZR 1000 S
• 2019 Polaris RZR 900 S
• 2019 Polaris RZR 1000 S
• 2020 Polaris RZR 1000 S
• 2020 Polaris RZR 900 S
• 2020 Polaris RZR 900 S Premium
• Tire Up to 34.5" OL2

Notes

• Does NOT fit 2016 RZR 900 S Base model (non-EPS) with the FOX Mono Shocks.
• General 1000 - Factory Bushings will NOT work with BIG LIFT, you must purchase Bushing Kits BK-HL-P-1 (Front) and BK-HL-P-2 (Rear). The installation of the Big Lift on the General requires the removal of the factory sway bar on the front.
• General with Standard Shocks without reservoir, flip the shock to work with upper lift brackets and lower control arms.
• General with Fox Style or reservoir shocks, proceed with installation as laid out in the instructions.
• All Outlaw RCV Axles MUST be registered with High Lifter within 30 days of purchase for warranty to be valid. Customer must register the Outlaw RCV Axles by sending the completed Axle Warranty Registration Card included in each axle box along with a copy of the original sales receipt to High Lifter.
• The installation of the Big Lift on the General requires the removal of the factory sway bar on the front. Polaris General with Standard Shocks without reservoir, flip the shock to work with upper lift brackets and lower control arms. Polaris General with Fox Style or reservoir shocks, proceed with installation as laid out in the instructions.
• High Lifter strongly recommends pairing this big lift kit with a High Lifter Frame Stiffener Kit. Reinforce your frame to save yourself from a potentially expensive repair!