L&W Fab Polaris RZR XP 1000 / XP Turbo Factory Style Tie Rods
Description
L&W Fab Polaris RZR XP 1000 / XP Turbo Factory Style Tie Rods
Features
Specs on the Rods:
- These are factory style ball and socket style.
- This listing is for a SET
- 6061 Aluminum.
- Made in America
- Lifetime Warranty on rod itself.
- Comes with Spindle Ends (You do not need to purchase the spindle ends separate from this kit, unless you need a replacement spindle end)
Specs for HD Rebuild-able Tie Rod Ends:
- Fully rebuildable
- Comes assembled with grease ready for installation Compatible with all L&W rods plus many others Starts with heat treated 4140 Black oxide finished
- 100 percent made in USA
- This product holds an 18 month warranty
Options:
- M14x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of Jam nut)
- M16x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of jam nut)
Fitment
- These Tie Rods Fit Polaris RZR 1000 and Turbo
- 2014-2023 models
Note
To determine whether you have M14 or M16, please measure the ends of your factory rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. The turbo model usually takes M16 ( measuring is recommended ), the 1000 model is not consistent and will need to be measured. **2016 Turbo will always be M14**