null
Huge Savings Through 03/31/24
MB Quart

MB Quart Polaris RZR Audio System (Stage 3) (Gen 2)

In Stock
  • MB Quart Polaris RZR Audio System (Stage 3) (Gen 2) MB Quart UTVS0022852 UTV Source
  • MB Quart Polaris RZR Audio System Stage 3 Gen 2 MBQR-STG3-2
MSRP: $1,599.99
$1,499.99
(You save $100.00)
Part #:
UTVS0022852
UPC:
806576230700
Manufacturer Part #:
MBQR-STG3-2
Primary Supplier:
MB Quart
Adding to cart… category.add_cart_announcement

Description

B Quart Polaris RZR Audio System (Stage 3) (Gen 2) (MBQR-STG3-2)

Polaris 2014-2020 RZR Tuned Audio Package: Three Speaker 800 Watt STAGE 3 Audio System includes AM/FM, BT LED Source Unit, two amplifiers powering 2 compression horn speakers, 10 inch subwoofer in a ported enclosure. All necessary mounting panels and harnessing are included.

Works on all Polaris RZR 2014-Current models.

  • Purposely Engineered TUNED AUDIO for Polaris RZR 2014-Current
  • LED Source Unit with Mounting Panel includes AM/FM, Bluetooth with Apple iPod/iPhone control
  • High Efficiency, Full Range Class D Amplifier creates big power, small chassis design with low current draw
  • High SPL 8 inch compression horn speakers make 30% louder than standard coaxials
  • High Impact HDPE Composite Enclosures RZR specific left and right kick panel enclosures, ultra compact design takes up minimal space
  • Dual Voice Coil 10 Inch Subwoofer is designed for deep, powerful bass with high volume
  • High Efficiency, Class D Mono Subwoofer Amplifier dedicated Bi Amplified System with Mono Amp
  • Vented High Impact HDPE Composite Enclosure ported (vented) for higher output and perfect fit under-dash with no cutting or drilling required
  • Vehicle Specific Wiring and Harness makes for dual amplifier harness with ID labels, simple "no mistakes" Plug & Play OEM Style Installation
  • LIFEShield IPX Rated fully protected against the elements
  • Mounting System for Amplifiers, the amplifier mounts behind dash on dedicated amp bracket

MB Quart has engineered a select group of UTV-tuned audio systems that are perfectly designed for the Polaris® RZR®. It is essential that every component installed onto a RZR be torture tested to be as reliable as it can be in the harsh off-road environment. MB Quart RZR® Tuned Packages are designed to fit the Polaris® RZR® 2013 and newer, except the 2018 TURBO S.

POLARIS® OFF-ROAD GRADE AUDIO BY MB QUART
Polaris® has partnered with MB Quart to engineer incredible audio products that will integrate seamlessly into your Polaris® machine. Make sure to check out the ALL-IN-ONE solutions that allow a quick installation with all the components (source unit, amplifier and speakers) in one unit or a BUILD YOUR OWN solution where you can customize and add components all at once or over time to create the ultimate musical experience.

Once the bullet proof nature of the system has been designed in and the components per "stage" or package are decided the system is tuned for music. Really great sounding OFF-ROAD TUNED AUDIO for the environment that has insane on-road and on-trail noise.

You have made the easy decision to choose RZR® TUNED AUDIO. The really hard choice is how much you are ready for; a little bit or all of it.

Features

  • COMPATIBLE VEHICLE FITMENTPolaris RZR 2014-Current w/Ride Command
  • MARINE GRADE PROTECTION/IPX RATINGIPX67
  • SOURCE UNIT FEATURESIntegration with RIDE COMMAND, a high-tech source unit with an off-road display that acts as the hub and integrates your phone, GPS, audio, and communication systems. The actual RIDE COMMAND source unit is NOT INCLUDED.
  • SPEAKER FEATURESThe front speakers are meticulously engineered to fit in the RZR kick panels. The entire system utilizes the MB Quart compression horn technology. (See inside here). This design assures that the system will be louder and better sounding than anything else on the trails. Upgrade this system to a STAGE 5 by adding the rear speakers, NHT1-120BPR. The harness is already wired for the upgrade.
  • AMPLIFIER FEATURESThe RZR system is powered by the NA2 series of amplifiers. The stereo amplifier is operating in 2 ohm mode for maximum volume for all 4 speakers when utilized in a STAGE 5 configuration (front and rear pods). Upgrade this system to a STAGE 5 by adding the rear speakers, NHT1-120BPR. The harness is already wired for the upgrade.
  • SUBWOOFER FEATURES400 Watt Specific 10 inch Subwoofer System includes 10 inch, Dual 4 ohm Subwoofer, RZR ported glovebox Subwoofer Enclosure, powered by the 400 Watt High Efficiency Class D amplifier.
  • MOUNT/HARNESSPlug and Play Harness. Waterproof Connectors with premeasured wires. No guesswork and no installation mistakes.
  • TIME AND TOOLSStandard hand tools are required. See the manual for time on each of the different components.

Specifications

  • TOTAL SYSTEM POWER (WATTS) - 800

Includes

  • 1. Source Unit - GMR-LED AM/FM, Bluetooth Controller with high-contrast LED screen, DIN box mount and USB, AUX input accessory.
  • 2. Amplifiers - 400 watt 2 channel amplifier for front Compression Horns and 400 watt mono subwoofer amplifier.
  • 3. Front Compression Horns - A pair of 8 inch compression horns that mount in composite enclosures in the left and right kick panel locations.
  • 4. Subwoofer - 10 inch Formula subwoofer in custom ported under-dash enclosure with integrated amplifier mounting rack.
  • Harness & Hardware - Fully engineered harness to connect all power, ground, audio and speaker signal. Kit includes swivel mount brackets for the rear compression horns.

fit-rzr-mbqr-stg3-2.jpg

Fitment

  • 2021 - 2023 Trail /Trail S
  • 2013 - 2018 XP /XP4 1000
  • 2019 - 2023 XP /XP4 1000
  • 2013 - 2018 XP /XP4 Turbo
  • 2019 - 2021 XP /XP4 Turbo
  • 2018 - 2021 Turbo S /Turbo S4
  • 2014 - 2018 900/900S/1000s
  • 2019 - 2021 900/900S/1000s
  • 2014 - 2018 S4 900
  • 2019 - 2020 S4 1000
  • Pre 2013 (Uni6 /Uni8) 900/900S/1000s
  • Pre 2013 (Uni6 /Uni8) S4 900
  • Pre 2013 (Uni6 /Uni8) 800
  • 2018 - 2022 (Uni6 /Uni8) RS1
  • 2020 - 2023 (Uni6 /Uni8) PRO XP /XP4

 

View AllClose

Questions