Rival Powersports Yamaha Wolverine R Max Rear A-Arm Guards

One of the most vulnerable and less protected parts of your Yamaha R Max 2 / 4 seaters is you’re a-arms and CV joints. But you can protect both with our 5/32" Marine grade aluminum A-Arm Protectors. With a high folded front edge that protects you’re a-Arms from impact and your CV Boots from sticks hitting and tearing the boot and letting dirt in there, to wreck the joint. We also have drain holes on the underside to let dirt, grass seed, and sand that has built up fall out or be washed out. Our A-Arm Guards utilize both factory mounting points and when needed we use steel brackets to give maximum strength when mounting. We also use a stamping procedure to allow extra strength for the A-Arm Guard and for our high strength bolts to be recessed to allow a flat surface for sliding over any obstacle you might come across on the trail. Each part number comes as a pair.

THIS PART NUMBER IS FOR THE PAIR OF FRONT A-ARM GUARDS. THESE WILL FIT BOTH 2 AND 4 SEAT MODELS

Features

• Constructed with high strength 5/32" Marine Grade Aluminum
• Laser Cut
• Deep Stamped were able to add strength
• Powder Coated
• Utilizes Factory Mounting Points and additional brackets
• Drain and maintenance holes
• Hidden fastening and special plate washers when required

Fitment

• Wolverine R Max 2 1000 Limited 2021-2022
• Wolverine R Max 2 1000 XT-R 2021-2022
• Wolverine R Max 2 1000 Sport 2021-2022
• Wolverine R Max 2 1000 R Spec 2021-2022