SuperATV Can-Am Maverick Sport MaxDrive Power Flip Windshield

SuperATV Can-Am Maverick Sport MaxDrive Power Flip Windshield

Power Flip Windshield
With SuperATV’s MaxDrive Power Flip Windshield installed on your Can-Am Maverick Sport, you’ll have the versatility to ride comfortably no matter the weather conditions. In seconds you can close, open, or set it to any position right from your seat with the flip of a switch. It’s the best solution for year-round riding, and once you have it installed you can leave it on all year.

Made of Quality Parts
From the top down, this Maverick flip windshield is constructed using the most robust components available. We never cut corners—that includes the high-strength electronic actuators and heavy-duty clamps. Are you into extreme rides and worried the actuators won’t hold this windshield into place? Think again. The terrain will have your stomach upset, but your windshield will still be in the same position. There’s more—it comes to you partially preassembled so you spend less time in the garage and more time on the trail.

Made with Polycarbonate Strength
With a windshield made of 1/4” polycarbonate, you won’t need to flinch every time a rock flies at you. It’s 250 times stronger than glass, so it’ll take more than a rock or branch to crack it. Polycarbonate is built to last.

XR Optic Hard Coating
This windshield is unstoppable thanks to a combo of polycarbonate and our proprietary XR Optic Hard Coating. The invisible, scratch-resistant coating is applied to both sides to protect against hazing and deterioration from UV radiation. You’ll have crystal-clear rides for years to come.

Made by Experts
SuperATV consists of the most experienced windshield designers and manufacturers in the industry. We strive to set the bar for quality and innovation. If you’re looking for the best you can get, this is it.

Features

• Flips open and closed with dash-rocker-controlled electronic actuators
• Can be opened to any position for full airflow control
• Made of 1/4” polycarbonate—250x stronger than glass and 25x stronger than acrylic
• Utilizes our proprietary XR Optic Hard Coating
• Screen printed border adds a clean automotive look
• Fits the contours of your cage and hood perfectly
• Comes partially preassembled for easy installation
• Can be used with soft or hard tops
• Made in the USA

Fitment

• Can-Am Maverick Sport 1000 : 2019+
• Can-Am Maverick Sport 1000 DPS : 2019+
• Can-Am Maverick Sport 1000R DPS : 2019+
• Can-Am Maverick Sport 1000R XRC : 2019+
• Can-Am Maverick Sport 1000R XMR: 2019+
• Can-Am Maverick Sport 1000R DPS MAX : 2019+
• Can-Am Maverick Sport 1000R XXC : 2020+

NOTE: Not compatible with aftermarket intrusion bars

Includes

• Wiring harness
• Windshield
• Rocker switch
• All frame brackets
• All gaskets and seals
• 6) Clamps
• (2) Actuator brackets
• (2) Pairs of hinges
• (2) Actuator mounts
• (2) Actuators

Note

WARNING: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.

âš  California Proposition 65 Warning âš 
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.