How AGM's 7,000 lb drill-driven scissor jack makes heavy-duty jacking and recovery faster, safer, and a lot less work

Anyone who spends real time on the trail knows the truth about jacks. The one that came with your rig is the one you never actually want to use. Factory jacks are small, slow, and built for a flat garage floor, not a sand wash at Glamis or a rutted climb at Sand Hollow. That gap between what you have and what you need is exactly where the AGM Products Scissor Jack HD comes in.

This is a heavy duty modular jack built for big loads and bad ground. AGM Products designed it for full-size trucks, overland rigs, SUVs, and camper vans, which means it carries far more muscle than your average Side by Side will ever ask of it. For UTV owners, that extra headroom is the whole point. The same jack that lifts your SXS in the staging area will also pick up the truck and trailer hauling it out to the desert. One tool covers the entire setup.

The Factory Jack Problem

A flat tire on pavement is annoying. A flat in soft sand or on a loose gravel climb is a different animal. Narrow factory jacks sink, tip, and fight you the whole way up. Lifting a loaded vehicle by hand with a tiny crank handle is slow and tiring, and doing it on uneven terrain adds real risk. The Scissor Jack HD was built to take that scenario and make it manageable. AGM Products focused on three things that matter most when you are stuck: stability, capacity, and how little effort it takes to actually get the vehicle in the air.

Drill-Driven Lifting With the EZ-Torque Gearbox

The headline feature is the EZ-Torque reduction gearbox. AGM Products says it cuts lifting effort by over 70 percent, which lets a standard 18V drill do most of the work for you. The jack ships with a 0.5 inch hex drive and a drill socket adapter, so you grab the cordless drill already living in your trailer, hit the trigger, and watch the rig climb. No frantic cranking, no burning shoulders, no kneeling in the dirt for ten minutes. When you are trailside and want the wheel changed before the light goes, that speed is the difference between a quick fix and a long evening.

AGM Products recommends a drill with around 1500 in. lbs of torque to run it comfortably. If your drill comes up short, the hand-drive option is always there as a backup, so you are never fully out of luck on the side by side trail.

7,000 lbs of Capacity, Built From Steel

The Scissor Jack HD is made from high-strength steel and rated up to 7,000 lbs. For a UTV that number is heavy overkill, and that is a good thing. It means the jack is never working near its limit when it lifts your SXS, and it has the strength to handle the full-size tow vehicle and loaded trailer that came along for the trip. The wide steel base spreads the load and helps the jack stay planted on dirt, gravel, sand, and uneven ground, the kind of footing that makes smaller, narrower jacks nervous. This is a tested and trusted approach to a jack you can actually rely on when the ground is working against you.

Lift Height and Travel That Match Bigger Tires

The jack offers 13.8 inches of lifting travel and a 20.5 inch maximum lift height, with a collapsed height of just 6.7 inches. That range is what makes it work on lifted rigs running larger tires, where a standard jack simply runs out of reach. It climbs high enough to clear a big meat on a lifted UTV or truck, then folds back down small enough to stash inside the cab, under a seat, or in the trailer cabinet. You get the reach when you need it without giving up your storage space the rest of the time.

The VersaLift Combo Head

Lift points in the real world are rarely clean. Axles, frame rails, skid plates, and odd flat spots all show up depending on the vehicle and the situation. The VersaLift swivel combo head is built to adapt to axles, flat surfaces, and uneven lift points, so you are not hunting for the one perfect contact spot. The swivel design also keeps the drive hex positioned where it is easiest to reach with the drill, even when the jack is tucked under a vehicle at an awkward angle. Little details like that are what separate a jack you fight with from one that just works.

Compact, No Hydraulics, No Headaches

Because the Scissor Jack HD is mechanical, there are no hydraulics to leak, fade, or fail in the cold. There is also no bulky floor jack to wrestle in and out of the trailer. At 25 lbs it is built to ride along in your recovery kit without taking over the whole storage box. For UTV and Side by Side owners who already pack lights, tools, straps, and spares, a jack that earns its space matters. This one does. It even ships in an AGM storage go-bag to keep it organized and ready to grab.

Feature Highlights

• EZ-Torque reduction gearbox cuts lifting effort by over 70 percent so a standard 18V drill does the work
• 7,000 lb load capacity handles UTVs, trucks, SUVs, overland rigs, and loaded trailers with room to spare
• High-strength steel build with a wide base for stability on dirt, gravel, sand, and uneven terrain
• 20.5 inch max lift height and 13.8 inches of travel to clear larger tires on lifted rigs
• VersaLift swivel combo head adapts to axles, flat surfaces, and uneven lift points
• No hydraulics to leak or fail, with a compact 6.7 inch collapsed height for easy storage
• Lightweight at 25 lbs and includes a drill socket adapter plus an AGM storage go-bag

Specifications

• Max Lift Height: 20.51 in (extended)
• Collapsed Height: 6.7 in
• Weight: 25 lbs
• Load Capacity: 7,000 lbs
• Travel: 13.8 in stroke
• Input Drive: 0.5 in hex (drill adapter included)
• Recommended Drill Torque: 1500 in. lbs
• Product Dimensions: 24.75 in x 5.5 in x 6.7 in
• Package Dimensions: 28.7 in x 8.43 in x 7.48 in

Who It's For

The Scissor Jack HD makes the most sense for the rider who runs a full setup. A UTV or SXS on the trailer, a tow vehicle to get it there, and a recovery kit that has to cover all of it. One jack that lifts the side by side, the truck, and everything in between keeps your kit simple and your weekends moving. If you ride remote, run bigger tires, or just want a jack that does not fight you when the ground is soft, this is the one to grab.

Ready to ditch the factory jack? UTV Source has the AGM Products Scissor Jack HD in stock and ready to ship for $399.99

About AGM Products

AGM Products designs high-performance off-road parts and tools focused on durability, efficiency, and easier maintenance. The brand builds race-proven gear trusted by off-road enthusiasts and pros, from precision suspension components to pit tools made to take a beating. The Scissor Jack HD fits that lineup, a no-nonsense piece of recovery gear made to earn its spot in your rig.